Sürdürülebilir Kalkınma Amaçları

• 1

• MakaleYalnız künye2026Scopus SJRQ2/r/munzur/1365
  Influence of infill design on mechanical behavior of PLA-TPU hybrid sandwich beams

  Arikan, Volkan; Dogan, Akar; Guler, Serkan

  The purpose of this work is to analyze the mechanical behavior of hybrid sandwich beams that were printed using the Fused Deposition Modelling (FDM) technology. These beams were made of Polylactic Acid (PLA) and Thermoplastic Polyurethane (TPU) materials. Standard mechanical tests (ASTM C393 and C365) were utilized in order to assess the impact that several infill patterns (Cubic, Octet, and Trihexagonal) and infill densities (ranging from 15% to 40%) had on the flexural and compression performance of the material. According to the findings, trihexagonal patterns demonstrated improved energy absorption capabilities when subjected to compression, but octet designs offered superior flexural stiffness, particularly in hybrid constructions. According to the findings of tests conducted with hybrid constructions consisting of a TPU core and a PLA surface layer, the effect of infill patterns on component strength is directly influenced by the change in the material character, and it is possible that various materials would exhibit different manifestations of this effect. These findings offer useful information that may be used to optimize lattice geometry and hybridization procedures for the purpose of developing high-performance lightweight structures for engineering applications.

  • 
  AtıfWoS1·OpenAlex2

  İncele
• MakaleYalnız künye2021Scopus SJRQ1/r/munzur/2551
  Low-velocity impact, bending, and compression response of carbon fiber/epoxy-based sandwich composites with different types of core materials

  Dogan, Akar

  This study focuses on the investigation of the effects of different core types on the low velocity impact, three-point bending and out-of-plane compression loading performance of sandwich composites. Three core materials were selected: Balsa wood, PVC foam, and Ayous wood. The facesheets of sandwich composites were produced by woven carbon/epoxy. Balsa and PVC foam are widely used in sandwich composites as core materials. In this study, Ayous wood, which is the lightest tree after Balsa, was used as core material in addition to traditional core materials. Woven carbon fiber fabrics with an areal density 200 g/m2 as reinforcement and epoxy matrix were used to produce the sandwich composite. Vacuum-assisted resin infusion molding method was used to manufacture composite panels. A number of tests under various impact energy levels for three different sandwich composites were conducted with Fractovis Plus impact testing machine in order to investigate the energy absorption capacity of sandwich composites. Maximum contact forces, absorbed energies, and the maximum deflections of sandwich panels were obtained for each impact energy level. Despite having the same facesheets, Ayous core sandwich composites possess a higher perforation threshold than Balsa and PVC foam sandwich composites. The perforation threshold of Balsa, PVC foam, and Ayous sandwich composites are 85, 72, and 170 J, respectively. In addition, the Ayous core sandwich composites have better bending and compression strengths. The bending strength of the Ayous sandwich composite is higher about six times than PVC sandwich composite and about two times than Balsa sandwich composite.

  AtıfScopus61·WoS56·OpenAlex56

  İncele