Sürdürülebilir Kalkınma Amaçları

• 1
• 1
• 1
• 1

• MakaleYalnız künye2026Scopus SJRQ2/r/munzur/1377
  Adsorption of Reactive Red 120 dye from aqueous solutions using sepiolite clay with a channel-structured morphology: Mechanism, kinetics, isotherm, and thermodynamic studies

  Fırat, Tülay

  The effective treatment of dye-containing wastewater remains a major environmental challenge due to the high stability and solubility of reactive dyes. In this study, the adsorption behavior of Reactive Red 120 (RR120), an anionic reactive azo dye, from aqueous solutions was investigated using natural sepiolite clay possessing a channel-structured morphology. Batch adsorption experiments were performed to evaluate the effects of contact time (1–200 min), initial dye concentration (50–500 mg L−1), adsorbent dosage (0.1–1.5 g), solution pH (2–10), and temperature (25–50°C). The adsorption equilibrium was reached within approximately 75 min. The Langmuir isotherm provided the best fit to the equilibrium data, yielding a maximum monolayer adsorption capacity of 168.4 mg g−1 at 298 K. Thermodynamic analysis revealed that the adsorption process was spontaneous and endothermic, with an activation energy of 32.41 kJ mol−1. Adsorption kinetics were analyzed using pseudo-first-order, pseudo-second-order, and intraparticle diffusion models, while equilibrium data were evaluated using Langmuir, Freundlich, and Temkin isotherm models. The kinetic data were best described by the pseudo-second-order model, while thermodynamic analysis revealed that the adsorption process was spontaneous and endothermic. FTIR and XRD analyses further supported the important role of the channel-structured framework of sepiolite in RR120 adsorption. Unlike many clay-based adsorbents that require chemical modification, natural sepiolite exhibited high adsorption performance due to its intrinsic fibrous morphology, nano-channel structure, and high surface area. These findings demonstrate that natural sepiolite is a promising, low-cost, and sustainable adsorbent for the treatment of dye-contaminated wastewater.

  • 
  • 
  İncele
• MakaleYalnız künye2023Scopus SJRQ2/r/munzur/2070
  Numerical investigation of the effect of using louver baffles on thermal performance in solar air collectors

  Tuğan, Volkan; Işık, Erdem

  Conventional flat plate solar air collectors have advantages such as low cost and simple design. However, their thermal efficiency is lower than that of other designs. The thermal efficiency of these collectors can be increased by detailed examination of parameters such as the shape, size, arrangement and material of the air duct. In this study, it is aimed to improve the thermal efficiency of solar air collectors. The effect of louver baffles, which were not previously used in solar air collectors, on thermal efficiency was investigated numerically via computational fluid dynamics. Three different solar air collectors with flat plates, segmented baffles, and louver baffles were compared in terms of thermal efficiency. In addition, pressure drops in solar air collectors were investigated. The mass flow rate of the air in all collectors is assumed to be 0.04 kg/s. Analyzes were carried out between 09:00 and 16:00. The thermal efficiency values obtained during the day for solar air collectors with flat plate, segmented baffles and louver baffles are 27.66%–56.35%, 29.57%–58.82% and 30.09%–59.47%, respectively. The daily thermal efficiency values obtained for solar air collectors with flat plate, segmented baffles and louver baffles are 46.98%, 49.18% and 49.87%, respectively. The pressure drop for solar air collectors with flat plate, segmented baffles and louver baffles were found to be 4.62, 18.82 and 5.96 Pa, respectively. Based on the data obtained from this study, louver baffles are recommended for use in solar heating applications due to their high thermal efficiency and low pressure drop.

  • 
  • 
  AtıfScopus5·WoS5·OpenAlex5

  İncele