Çelik, E.; Aslan, A. K.

In this study, the powder mixture which consists of Cu-Fe-Co was produced by using the method of hot pressing technique. In addition, effect of heat treatment process on microstructure and mechanical properties of this alloy was investigated. Following the hot pressing process applied on the samples, heat treatment was carried out at 950 degrees C for two different dwelling times (90 and 180 minutes). Measured density values were considered as physical characteristics, while hardness and fracture strength values were considered as mechanical characteristics. It was observed that porosity rates of hot pressed samples were decreased by increasing of temperature and pressing parameters. In this study it was observed that Cu was spread in matrix and filled the micro porosities. Hardness values were determined to be decreased as a result of grain growth after heat treatment process. That 4 fold increased elongation % values which were achieved by TRS experiments were observed as well.

AtıfWoS3·OpenAlex2

İncele