Karaduman, Oktay

Rare earth compounds, including lanthanide hydroxides, have been greatly interested for their promising uses, such as in optoelectronics or photonics, due to their unique electronic and optical transitions properties based on their 4f electron shells. In this work, for the first time new transparent flower-like lanthanum(III)hydroxide (La(OH)3) with borate (LaB3O6) composite nanosheets having a semiconducting band gap suitable for optoelectronics were synthesized by a very simple one-step solvothermal method from a mixture of pure lanthanum oxide and boron without using water or any acidic solvent or surfactant. The practical synthesis was made for two different solvothermal time durations. The synthesized nanocomposites were investigated by XRD, FIB-SEM imaging, EDS, FTIR, UV-vis absorbance, Raman, Ellipsometry, and TG-DTA analyses. The pure precursors lanthanum oxide (La2O3) and boron converted to La(OH)3 and LaB3O6. EDS elemental mapping showed the homogeneous distribution of elements in the nanocomposites. A strong deep-UV absorbance band was detected. The very low reflectance and excellent visible transmittance (exceeding 86% for the sample with a longer solvothermal process time) reaching infrared region were achieved. The direct and indirect band gap energies were estimated by the Tauc plot method for both of the composite samples. Adding boron reduced the literature given direct band gap value (around 4.5-5.5 eV) of pure La(OH)3. DTA and TGA results revealed the steps of mass losses, including decomposition of La(OH)3. FTIR analyses confirmed the presence of the formed compounds. All results showed that the La(OH)3+LaB3O6 nanocomposites can be suitably used in related applications, including electro-optic, photonic, solar cell, catalysts etc.

İncele

Özkul, İskender; Kalay, Ece; Güler, Seval Hale; Karaduman, Oktay; Şimşek, Telem; Bülbül, Zeynel Abidin; Aksu Canbay, Canan; Sen Baykal, Duygu; ALMisned, Ghada; Tekin, H.O.

Rare-earth substitution provides a route for tailoring the structural, magnetic, and gamma-ray attenuation behaviour of Ho-based Co-Mn double perovskites; however, the combined effects of rare-earth ionic size, magnetic character, and substitution level remain insufficiently understood. In this study, Ho1.5La0.5CoMnO6, Ho1.2Er0.8CoMnO6, Ho1.3Sm0.7CoMnO6, and Ho2CoMnO6 were synthesized through a two-step route involving mechanical alloying to obtain precursor powders, followed by annealing at 1000 °C in air to promote oxidation and double-perovskite phase formation. Their structural, thermal, surface-chemical, magnetic, and gamma-ray attenuation properties were examined by X-ray diffraction, thermal analysis, X-ray photoelectron spectroscopy, SEM-EDS, vibrating-sample magnetometry, and theoretical shielding calculations based on half-value layer (HVL) and transmission factor (TF) parameters. The XRD patterns were consistent with predominantly monoclinic P21/n type double-perovskite structures, while weak additional reflections suggested possible minor secondary phases. SEM-EDS showed homogeneous elemental distributions, and XPS analysis indicated Co2+ dominated and mixed Mn-valence characteristics in the spectra where reliable component analysis was possible. All compositions exhibited a low-temperature ferromagnetic-like field response but did not reach magnetic saturation at 3 T. Ho2CoMnO6 and Ho1.3Sm0.7CoMnO6 showed the highest field-dependent magnetization values at 10 K, whereas Ho1.2Er0.8CoMnO6 displayed the lowest response. The theoretical gamma-ray attenuation calculations showed clear composition-dependent differences. At 0.662 MeV, the HVL values were 1.0650, 0.9972, 1.0438, and 0.9967 cm for Ho1.5La0.5CoMnO6, Ho1.2Er0.8CoMnO6, Ho1.3Sm0.7CoMnO6, and Ho2CoMnO6, respectively. At the same photon energy and a thickness of 1.0 cm, the corresponding TF values were 0.0896, 0.0858, 0.0882, and 0.0860. Thus, Ho1.2Er0.8CoMnO6 and Ho2CoMnO6 exhibited the lowest HVL and TF values among the investigated compositions. The shielding calculations identified Ho1.2Er0.8CoMnO6 and Ho2CoMnO6 as the most effective attenuators, with lower HVL and TF values across the investigated energy range. These results show that rare-earth substitution enables compositional tuning of magnetic and theoretical gamma-ray attenuation behaviour, with the observed trends reflecting the combined influence of rare-earth ionic size, magnetic character, substitution level, and valence-state complexity.

İncele

Karaduman, Oktay; Doğan, Fatih; Dehghanpour, Heydar; Yüzüak, Gizem Durak; Yüzüak, Ercüment; Canbay, Canan Aksu

Cu-Al-Mn-Fe high-temperature shape memory alloys containing 0-1.0 wt.% La2O3 were fabricated by vacuum arc remelting to investigate oxide-dispersion effects on microstructure, martensitic transformation, wear, and corrosion behavior. XRD and SEM analyses revealed that low La2O3 additions (0.2-0.4 wt.%) promoted β1′ martensite refinement and enhanced crystallinity, while higher contents induced structural heterogeneity. The alloy with 0.4 wt.% La2O3 exhibited the highest transformation enthalpy (7.49 J g−1), reduced friction coefficient (~0.55), and the narrowest wear scar (~501 µm). Electrochemical tests in 3.5 wt.% NaCl showed a fivefold decrease in corrosion current density and increased charge-transfer resistance (2512 Ω cm2) for the same composition. Excessive La2O3 led to performance degradation due to particle agglomeration and interfacial defects. The results demonstrated that controlled La2O3 addition enabled microstructural refinement and multifunctional performance enhancement in Cu-based shape memory alloys.

İncele

Özkul, İskender; Kalay, Ece; Güler, Ömer; Karaduman, Oktay; Canbay, Canan Aksu; Hameed, Louis Ibrahim; Almisned, Ghada; Baykal, Duygu Sen; Tekin, H.O.

This study investigates the effect of 1 at.% rare-earth (RE = Sm, Gd, Dy) addition on the structural, mechanical, magnetic, and radiation shielding properties of CoFeNiMnTi high-entropy alloys produced by arc melting. X-ray diffraction results reveal an FCC-dominant structure accompanied by secondary Laves-type phases, with increased phase complexity observed in Gd- and Dy-containing alloys. Mechanical evaluation shows a significant hardness enhancement, reaching 581 HV for Gd and 548 HV for Dy, compared to 447 HV for the reference alloy. Magnetic measurements indicate soft-ferromagnetic behaviour for all compositions, with magnetization increasing in the order S0<S1<S2<S3, highlighting the strong influence of Dy on magnetic response. Elemental mapping confirms a homogeneous distribution with minor local compositional variations contributing to phase evolution. Thermodynamic analysis suggests that rare-earth addition increases lattice distortion and chemical complexity without strongly differentiating among RE types. In terms of radiation shielding, linear attenuation coefficients and effective atomic number values demonstrate improved gamma-ray attenuation, particularly at low energies, with Dy exhibiting the highest performance. In contrast, fast neutron removal cross section values remain nearly unchanged, indicating limited sensitivity to dilute RE addition. It can be concluded that the incorporation of Dy results in the most balanced multifunctional performance, whereas Gd primarily enhances mechanical strength, emphasizing the importance of rare-earth selection in the design of high-entropy alloys for radiation-related applications.

İncele

Karaduman, Oktay; Kalay, Ece; Ozkul, Iskender; Kurgun, Mehmet Ali; Canbay, Canan Aksu; Guler, Omer; ALMisned, Ghada; Baykal, Duygu Sen; Tekin, H.O.

A novel Cu-based high-temperature shape memory alloy (HTSMA) with the composition 70.84Cu–23.80Al–4.14Mn–1.22Fe (at. %) was successfully synthesized via arc melting in this study. The effects of thermal aging duration on the alloy’s martensitic transformation behavior, shape memory effect (SME), and microstructural evolution were systematically investigated. Six samples were prepared from the as-cast ingot: one was homogenized in the β-phase region and quenched into ice-brine to induce a martensitic structure, while five others were subsequently aged at 350 ℃ for varying durations and air-cooled. Thermal and structural characterizations were conducted. These included differential scanning calorimetry (DSC), X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), and optical microscopy. Prolonged aging altered transformation temperatures and reduced both enthalpy and entropy values. It also promoted the formation of observed precipitates, vacancies, and coarsened 2H martensites. Prolonged aging altered the microstructure and thermal response, leading to partial SME degradation. Additionally, the alloy’s gamma-ray and fast neutron shielding parameters were theoretically estimated using simulation software to explore its potential functional scope. The calculated results indicate that the CuAlMnFe HTSMA is predicted to exhibit favorable attenuation performance across a wide energy spectrum, with appropriate values of mass attenuation coefficient (MAC) and half-value layer (HVL). In particular, the fast neutron removal cross-section was calculated as 0.139 cm−1, which is significantly higher than those of water (0.1023 cm−1), graphite (0.0773 cm−1), and B4C (0.0714 cm−1). In conclusion, the CuAlMnFe HTSMA developed in this study offers a unique profile combining tailorable shape memory behavior with a computationally predicted potential for nuclear radiation shielding. These properties offer novel insights into the alloy’s potential for applications in high-radiation environments that require both mechanical actuation and radiation protection, pending experimental validation of its shielding performance.

AtıfScopus1·OpenAlex1

İncele

Özkul, İskender; Karaduman, Oktay; Şimşek, Tuncay; Şimşek, Telem; Canbay, Canan Aksu; Güler, Ömer; ALMisned, Ghada; Tekin, H.O.

This study systematically investigates the influence of Cr and Mn additions on the structural, magnetic, and radiation shielding properties of NiFeGaCo-based ferromagnetic high-entropy shape memory alloys (FHESMAs) synthesized via the arc melting method. The fabricated NiFeGaCo, NiFeGaCoCr, and NiFeGaCoMn alloys were comprehensively characterized in terms of their phase formation, microstructure, martensitic transformation behavior, and magnetic performance. The results demonstrated that Mn addition significantly improved the magnetic properties, yielding the highest saturation magnetization (56.64 emu/g) and lowest coercivity (5.55 Oe), making NiFeGaCoMn highly suitable for soft magnetic applications. In contrast, Cr addition provided moderate magnetic behavior but enhanced structural stability with the largest crystallite size and lowest lattice strain. Moreover, gamma-ray and fast neutron shielding investigations revealed that the Cr-containing alloy exhibited superior performance in terms of linear attenuation coefficient, half-value layer, effective electron density, and fast neutron removal cross-section values, while Mn addition slightly reduced these shielding capabilities. It can be concluded that Cr addition offers a balanced advantage in designing FHESMAs with combined magnetic sensitivity and radiation shielding efficiency, whereas Mn addition is more effective for maximizing magnetic performance with a compromise in shielding characteristics.

AtıfScopus2·OpenAlex2

İncele

Özkul, İskender; Kalay, Ece; Karaduman, Oktay; Kizilgün, Yasİn; Güler, Ömer; Canbay, Canan Aksu

This study investigates the effects of different cerium additions on the properties of Cu-Al-Mn high-temperature shape memory alloy (HTSMA), such as the characteristic martensitic transformation temperatures, transformational kinetic parameters, and martensitic microstructures which are related to its shape memory mechanism and also to its magnetic behavior. Polycrystalline alloys with a base composition of Cu77.32Al21.02Mn1.67 (at.%) were synthesized, and varying concentrations of cerium (Ce-1 to Ce-4) were added for comparison. Differential scanning calorimetry tests revealed notable increments in transformation temperatures with cerium additions. Specifically, the austenite start temperature of the reference alloy increased from 143.75 °C to 194.88 °C by 0.05 at.% of Ce addition (Ce-3 alloy), corresponding to the formation of CeCu5 and Mn1.15Cu3.85Ce phases. However, excessive Ce addition in Ce-4 led to the over-stabilization of secondary phases, reducing the transformation temperatures. Microstructural analysis indicated that Ce addition of refined grains changed the crystallite size of the martensite structure and reduced lattice strain (from 0.72% to 0.34%). Magnetic characterization demonstrated that Ce addition shifted the alloy towards paramagnetic behavior, with M-H curves showing no significant coercive field or remanent magnetization across the studied alloy samples. These findings suggest that cerium can enhance the high-temperature performance of Cu-Al-Mn HTSMAs, with potential applications in environments requiring both shape memory and magnetic properties.

AtıfScopus3·WoS3

İncele

Kalay, Ece; Özkul, İskender; Karaduman, Oktay; Kızılgün, Yasin; Güler, Ömer; Canbay, Canan Aksu; Kilic, G.; Baykal, Duygu Sen; ALMisned, Ghada; Tekin, H.O.

This study systematically investigates the effect of Ce addition on the thermal, structural, and radiation shielding properties of CuAlMn-based high-temperature shape memory alloys (HTSMAs). Among the different compositions, Ce-III demonstrated the most balanced performance, exhibiting optimized phase transformation behavior, microstructural refinement, and enhanced gamma-ray attenuation. Differential Scanning Calorimetry (DSC) analysis revealed that Ce-III exhibited lower transformation temperatures, with austenite start (As) and finish (Af) temperatures of 378.13 °C and 429.75 °C, respectively, and martensite start (Ms) and finish (Mf) temperatures of 402.52 °C and 341.91 °C, suggesting improved thermal stability. Microstructural analysis indicated significant grain refinement, attributed to Ce's dislocation pinning effect, which contributed to enhanced strength and radiation attenuation. X-ray diffraction (XRD) patterns confirmed the formation of Ce-rich intermetallic phases, such as Mn1.15Cu3.85Ce and Cu8Ce4, which increased density and photon interaction probability. The Ce-III alloy exhibited superior linear attenuation coefficients and reduced half-value layer, reinforcing its effectiveness as a radiation shielding material. It can be concluded that Ce-III represents an optimal composition with a synergistic combination of structural stability, phase transformation control, and enhanced radiation shielding capabilities, making it a promising candidate for nuclear and high-radiation applications.

AtıfOpenAlex1

İncele

Özkul, İskender; Karaduman, Oktay; Şimşek, Tuncay; Şimşek, Telem; Canbay, Canan Aksu; Güler, Ömer; ALMisned, Ghada; Baykal, Duygu Sen; Tekin, Huseyin Ozan

High-entropy alloys (HEAs) are a novel class of materials known for their complex compositions and exceptional multifunctional properties. In this study, NiCoMnTi-based HEAs were modified with Fe, Cr, and Cu as fifth elements to systematically investigate their structural, magnetic, thermodynamic, and nuclear radiation shielding characteristics. The alloys were synthesized via arc melting and characterized using XRD, SEM-EDS, VSM, and theoretical modeling methods. The findings reveal that each additional element uniquely alters the alloy’s properties. The Fe-containing alloy exhibited a well-defined lamellar microstructure, the highest saturation magnetization (10.79 emu/g), and a Curie temperature near 450 K, along with strong gamma-ray shielding performance across both low and high energy ranges. The Cr-containing alloy demonstrated soft magnetic behavior, featuring the lowest coercivity (29.64 Oe) and the highest fast neutron removal cross-section. In contrast, the Cu-containing alloy enhanced low-energy photon attenuation due to its higher atomic number but exhibited limited magnetic homogeneity. Despite these differences, all samples displayed stable thermodynamic behavior and comparable buildup factor trends. Overall, the addition of Fe led to a synergistic improvement in both magnetic and radiation shielding capabilities of the NiCoMnTi-based HEA system.

AtıfScopus3·OpenAlex3

İncele

Özkul, İskender; Karaduman, Oktay; Şimşek, Telem; Şimşek, Tuncay; Canbay, Canan Aksu; Güler, Ömer; Şan, Mert Hüseyin; ALMisned, Ghada; Tekin, H.O.

This study investigates the thermal, structural, magnetic, and radiation shielding properties of CuAlNi-based high-temperature shape memory alloys (HTSMAs) enhanced through sequential alloying with Co, Fe, Mn, and Cr. Five different variants were produced, designated as CRef (reference CuAlNi alloy), CCo (CuAlNiCo), CFe (CuAlNiCoFe), CMn (CuAlNiCoFeMn), and CCr (CuAlNiCoFeMnCr). Differential scanning calorimetry (DSC) confirmed the presence of reversible martensitic transformations in all alloys, with Co and Mn additions significantly enhancing thermal stability. Structural analyses using X-ray diffraction (XRD) and microscopy showed significant grain refinement and phase transitions, while magnetic measurements highlighted the strong ferromagnetic response of CCo (CuAlNiCo) and the increased coercivity of CMn (CuAlNiCoFeMn) due to domain-pinning effects. Moreover, radiation shielding analyses demonstrated the critical influence of density and elemental composition, with CRef exhibiting superior linear attenuation coefficients (LAC), effective atomic number (Zeff), and energy absorption buildup factor (EBF) performance, attributed to its optimized Cu fraction and high density (7.1296 g/cm3). In contrast, CMn (CuAlNiCoFeMn) showed the weakest shielding properties due to reduced density and Mn content. Among the samples, CRef emerged as the superior alloy, demonstrating exceptional multifunctionality across all evaluated parameters, while CCr (CuAlNiCoFeMnCr) displayed synergistic properties, combining shape memory behavior with competitive shielding efficiency. It can be concluded that CuAlNi-based HTSMAs hold significant potential as multifunctional materials, particularly for nuclear safety and aerospace engineering applications, where adaptive functionality and radiation protection are critical.

AtıfScopus2·OpenAlex2

İncele