Sürdürülebilir Kalkınma Amaçları

• 3
• 3

• MakaleAçık Erişim2026Scopus SJRQ1/r/munzur/603
  Removal of Reactive Blue 4 Dye from Aqueous Solution with Magnetic Fe3O4@Nd/Alg Beads

  Karaaslan Ayhan, Nagihan; Seker, Seda

  In this study, magnetic iron oxide@neodymium/alginate (Fe3O4@Nd/Alg) beads were prepared by ionic crosslinking with neodymium (Nd) ions, then subjected to heat treatment, and for the first time, effective removal of Reactive Blue 4 (RB 4) dye from aqueous solution was achieved with these beads. For this purpose, ideal adsorption conditions that significantly affect the removal of this dye were determined. The ideal adsorption conditions were determined as pH:5, contact time (t):60 min, amount of magnetic Fe3O4@Nd/Alg bead (m):10 mg, initial RB 4 dye concentration (C0):25 mg/L, temperature (T): 25 °C. Adsorption isotherm, kinetic and thermodynamic studies were carried out under the ideal adsorption conditions. The adsorption data was found to completely follow Langmuir model for RB 4 dye and the maximum adsorption capacity of RB 4 was found to be 263.16 mg/g. The adsorption kinetic data was found to be compatible with pseudo-second order and adsorption processes were explained by intraparticle diffusion. In adsorption thermodynamics studies, it has been determined that the nature of the adsorption reaction is spontaneous, endothermic and with increasing randomness. Furthermore, reuse studies of magnetic Fe3O4@Nd/Alg beads were carried out and it was determined that these beads could be used successfully up to 10 adsorption/desorption cycles.

  • 
  • 
  AtıfScopus4·WoS4·OpenAlex4

  İncele
• MakaleAçık Erişim2022Scopus SJRQ1/r/munzur/2599
  Chitosan-graft-poly(N‑tert‑butylacrylamide) Copolymer: Synthesis, Characterization and Optimization of Tetracycline Removal Using RSM

  Tanyol, Mehtap; Torğut, Gülben

  In the present study, a graft copolymer was synthesized in accordance with the free radical method using N-tertiary butylacrylamide monomer on chitosan, which is an environmentally friendly polymer. The chemical structure and surface morphology of the newly synthesized graft copolymer were determined by Fourier transform infrared spectroscopy, scanning electron microscopy and X-ray diffraction. Moreover, the thermal behavior was analyzed by thermogravimetric analysis. The chitosan-graft-poly(N‑tert‑butylacrylamide) graft copolymer was used as an adsorbent for the rapid removal of tetracycline from aqueous solutions in order to investigate its applicability. Response surface methodology (RSM) was employed for the optimization of the study conditions, namely adsorbent dosage (0.01–0.04 g 100 mL−1), reaction time (10–90 min) and initial tetracycline concentration (10–100 mg 100 mL−1). The effects of these conditions on tetracycline uptake capacity were examined and the results were statistically analyzed. The RSM results showed that the maximum tetracycline uptake capacity of 104.81 mg g−1 was achieved under the following conditions: adsorbent dose of 0.03 mg 100 mL−1, reaction time of 51.12 min and initial tetracycline concentration of 97.99 mg L−1. ANOVA based on central composite design combined with RSM showed a good agreement between the experimental values and quadratic model estimates, thus resulting in a coefficient (R2) of 0.9118 for tetracycline uptake. The kinetics, isotherms, and thermodynamics of adsorption were examined, and results showed that equilibrium data fitted the Freundlich isotherm model, and the adsorption kinetics of tetracycline followed pseudo-second-order model. Thermodynamic parameters like the enthalpy − 10.39 kJ mol−1 (ΔH°), entropy 0.044 kJ mol−1 K−1 (ΔS°) and Gibbs free energy − 23.26 kJ mol−1 (ΔG°) were evaluated and also, ΔG° shows a negative values indicating that the adsorption process was exothermic and spontaneous. The findings demonstrated that the chitosan-graft-poly(N‑tert‑butylacrylamide) copolymer is an effective adsorbent for pharmaceutical wastewater treatment.

  • 
  • 
  AtıfScopus11·WoS12·OpenAlex11

  İncele
• MakaleAçık Erişim2022Scopus SJRQ1/r/munzur/2344
  Preparation of ε-Caprolactone/Fe3O4 Magnetic Nanocomposite and Its Application to the Remazol Brilliant Violet 5R Dye Adsorption from Wastewaters by Using RSM

  Pekdemir, Mustafa Ersin; Tanyol, Mehtap; Torğut, Gülben

  In this study, poly (ε-caprolactone)/Fe3O4 magnetic nanocomposite (PCL/Fe3O4 MNC) was synthesized by ring-opening polymerization. Then, PCL/Fe3O4 MNC was used as a novel adsorbent to remove remazol brilliant violet 5R (RBV 5R) from the aqueous media. The effects of PCL/Fe3O4 MNC dosage, process time, and initial RBV 5R concentration on the removal of RBV 5R were studied using the central composite design (CCD) method. The adsorption process was optimized using the response surface methodology, and the optimum conditions were defined. Optimum RBV 5R removal of 95.40% was obtained at a contact time of 167.98 min, PCL/Fe3O4 MNC dosage of 0.40 g, and RBV 5R concentration of 7.18 mg L−1. The process was also designed using the adsorption kinetic models and isotherm. The experimental data of RBV 5R adsorption on PCL/Fe3O4 MNC followed the Langmuir isotherm and pseudo-second-order kinetic models than the other models. Morphological and chemical properties of the adsorbent-adsorbate system indicated the high adsorption yield of RBV 5R on PCL/Fe3O4 MNC was achieved. The structural characteristics of the PCL/Fe3O4 MNC were analyzed by Fourier-transform infrared, attenuated total-reflectance (ATR), and X-ray diffraction. ATR tests showed that no significant change in chemical bond is found in PCL/Fe3O4 MNC before and after the adsorption process. The morphology of composites was investigated by scanning electron microscopy. A vibrating sample magnetometer (VSM) was used for the measurement of the magnetic property. Thermal analysis of MNC was studied using thermogravimetric analysis and differential scanning calorimetry instruments.

  • 
  • 
  AtıfScopus6·WoS5·OpenAlex6

  İncele