Sürdürülebilir Kalkınma Amaçları

• 1
• 1

• MakaleYalnız künye2026Scopus SJRQ2/r/munzur/769
  Investigation of the effect of ultrasonic assisted milling and minimum quantity lubrication methods on the machinability of Hardox 500 steel

  Dalgıç, Aras; Mahmat, Aybars

  Hardox steel is widely used in agriculture, mining and transportation due to its mechanical properties such as high wear resistance, high impact resistance, high hardness, high durability and long life. The machinability of Hardox 500 is difficult as its high hardness and wear resistance lead to tool wear and low machining speed. Recently, various processing and cooling methods have been developed to increase machinability. Ultrasonic assisted milling (UAM), one of these methods, is a method used as an alternative to conventional milling (CM) in the milling of traditionally difficult-to-machine materials. In addition, minimum quantity lubrication (MQL) is a cooling method used to provide lubrication and cooling in the cutting area. In this study, the impacts of machining method, feed rate and spindle speed on cutting force, surface roughness and tool wear in milling of Hardox 500 steel were investigated. In the MQL method, mixtures with nano-sized SiC particles were obtained and applied to the cutting area. In the study, MQL reduced cutting forces by up to 19 %, surface roughness by 18 %, and tool wear by 30 % compared to dry machining, while UAM further decreased cutting forces by 17 %, surface roughness by 15 %, and tool wear by 12 % compared to CM. These results demonstrate that MQL and UAM significantly enhance machining performance over conventional and dry methods.

  İncele
• MakaleAçık Erişim2026Scopus SJRQ2/r/munzur/636
  Experimental and numerical analysis of ceramic fiber geopolymer concrete under blast effect

  Dalğıç, Aras; Yılmazer Polat, Berivan; Savaş, Sedat

  This study employs both experimental and numerical methods to investigate the blast resistance of ceramic fiber-reinforced geopolymer concrete (CFGC), a cement-free material often referred to as green concrete due to its environmentally friendly nature compared to Portland cement concrete (PCC). Geopolymer concrete specimens, formulated with ground granulated blast furnace slag, silica fume, and varying proportions of ceramic fibers, were subjected to blast tests using 50, 100, 150, 200, and 250 grams of trinitroglycerin (TNG). A standard PCC specimen was utilized as a control. The results demonstrate that the incorporation of 10% ceramic fibers significantly enhances the blast resistance of the geopolymer concrete, reducing crater diameters by up to 20% compared to conventional PCC. Furthermore, the finite element model developed in ANSYS Workbench exhibits a strong correlation with the experimental data, validating the predictive capability of the numerical simulations. Overall, this research highlights the immense potential of CFGC as a sustainable, highly durable alternative for structures exposed to blast loads.

  • 
  İncele
• MakaleAçık Erişim2024Scopus SJRQ2/r/munzur/2085
  The Behavior of Ceramic Fiber Geopolymer Concrete under the Effect of High Temperature

  Dalğıç, Aras; Yılmazer Polat, Berivan

  Geopolymer concrete (GC), also known as green concrete, contains slag, silica fume, and fly ash as binders. The absence of cement in concrete is critical to protect the world from the environmental impacts of cement production. In addition, exposure to high temperatures is a critical parameter that causes loss of strength in concrete. In this study, Geopolymer concrete samples were prepared with 10 different samples containing different proportions of slag, silica fume, and porous ash and subjected to various physical, mechanical, and optical tests. The sample (GS90) with optimum workability and compressive strength, which also showed high performance in water absorption, freeze-thaw, and UPV tests, was used in high-temperature tests. Portland cement concrete (PCC) was used as a control sample. This study investigated the effect of high temperatures on the physical and mechanical properties of fiber-free GCs containing 2%, 5%, and 10% by volume of ceramic fibers. Therefore, fiber-reinforced, fiber-free, and PCC specimens were subjected to high-temperature tests at 100, 300, 600, and 900 °C. As a result of the observation of crack growth, color changes, and compressive strength parameters in the samples subjected to high-temperature tests, the thermal resistance of the 10% ceramic fiber geopolymer concrete sample was 2.5% higher than other samples. There is no study in the literature that examines the behavior of ceramic fiber-reinforced geopolymer concrete at high temperatures. This research revealed an important finding by proving that ceramic fiber reinforcement increases the compressive strength of geopolymer concretes at a remarkable rate after high-temperature impact.

  • 
  AtıfScopus8·WoS10·OpenAlex8

  İncele