Güler, Ömer; Güler, Seval Hale; Özkul, İskender; ALMisned, Ghada; Baykal, Duygu Sen; Tekin, Huseyin Ozan

This study represents an initial investigation toward exploring the multifunctional potential of the (ErSmGdYPr)2Hf2O7 high-entropy oxide as a thermal barrier coating (TBC) material in radiation environments. Therefore, the evaluated parameters should be considered as a preliminary step rather than a complete representation of the material’s overall performance in such complex applications. In this context, (ErSmGdYPr)₂Hf2O7 powders were synthesized through high-energy ball milling of commercial rare-earth oxide precursors followed by calcination at different temperatures. Structural evolution during synthesis was investigated using X-ray diffraction, scanning electron microscopy with energy-dispersive spectroscopy, and thermal analysis techniques. The results confirmed the formation of a defective fluorite-type high-entropy oxide structure after calcination at elevated temperatures, accompanied by homogeneous elemental distribution and stable ceramic microstructures. In addition to structural characterization, the radiation interaction behaviour of the synthesized material was evaluated through gamma-ray attenuation parameters and fast neutron removal cross-section analysis. The obtained results indicate that the presence of multiple rare-earth elements provides favorable interaction characteristics with both photons and fast neutrons. These findings highlight the potential of this high-entropy oxide as a precursor for multifunctional coating materials. However, it should be noted that this work represents a preliminary powder-level investigation, and further research on actual coating deposition and thermal testing is required to validate its service performance.

İncele

Özkul, İskender; Kalay, Ece; Güler, Seval Hale; Karaduman, Oktay; Şimşek, Telem; Bülbül, Zeynel Abidin; Aksu Canbay, Canan; Sen Baykal, Duygu; ALMisned, Ghada; Tekin, H.O.

Rare-earth substitution provides a route for tailoring the structural, magnetic, and gamma-ray attenuation behaviour of Ho-based Co-Mn double perovskites; however, the combined effects of rare-earth ionic size, magnetic character, and substitution level remain insufficiently understood. In this study, Ho1.5La0.5CoMnO6, Ho1.2Er0.8CoMnO6, Ho1.3Sm0.7CoMnO6, and Ho2CoMnO6 were synthesized through a two-step route involving mechanical alloying to obtain precursor powders, followed by annealing at 1000 °C in air to promote oxidation and double-perovskite phase formation. Their structural, thermal, surface-chemical, magnetic, and gamma-ray attenuation properties were examined by X-ray diffraction, thermal analysis, X-ray photoelectron spectroscopy, SEM-EDS, vibrating-sample magnetometry, and theoretical shielding calculations based on half-value layer (HVL) and transmission factor (TF) parameters. The XRD patterns were consistent with predominantly monoclinic P21/n type double-perovskite structures, while weak additional reflections suggested possible minor secondary phases. SEM-EDS showed homogeneous elemental distributions, and XPS analysis indicated Co2+ dominated and mixed Mn-valence characteristics in the spectra where reliable component analysis was possible. All compositions exhibited a low-temperature ferromagnetic-like field response but did not reach magnetic saturation at 3 T. Ho2CoMnO6 and Ho1.3Sm0.7CoMnO6 showed the highest field-dependent magnetization values at 10 K, whereas Ho1.2Er0.8CoMnO6 displayed the lowest response. The theoretical gamma-ray attenuation calculations showed clear composition-dependent differences. At 0.662 MeV, the HVL values were 1.0650, 0.9972, 1.0438, and 0.9967 cm for Ho1.5La0.5CoMnO6, Ho1.2Er0.8CoMnO6, Ho1.3Sm0.7CoMnO6, and Ho2CoMnO6, respectively. At the same photon energy and a thickness of 1.0 cm, the corresponding TF values were 0.0896, 0.0858, 0.0882, and 0.0860. Thus, Ho1.2Er0.8CoMnO6 and Ho2CoMnO6 exhibited the lowest HVL and TF values among the investigated compositions. The shielding calculations identified Ho1.2Er0.8CoMnO6 and Ho2CoMnO6 as the most effective attenuators, with lower HVL and TF values across the investigated energy range. These results show that rare-earth substitution enables compositional tuning of magnetic and theoretical gamma-ray attenuation behaviour, with the observed trends reflecting the combined influence of rare-earth ionic size, magnetic character, substitution level, and valence-state complexity.

İncele

Yayla, Nihal; Şimşek, Telem; Boyrazlı, Mustafa; Güler, Ömer

Neodymium (Nd), a rare earth element, was incorporated into the [FeCoNiCu(MnCr)0.5] high-entropy alloy (HEA) at weight percentages of 0.5%, 1%, 2%, and 5%. The alloys were synthesized successfully using the arc melting method. X-ray diffraction (XRD) analysis confirmed that both the undoped and Nd-doped alloys exhibit a single-phase solid solution with a face-centered cubic (FCC) crystal structure, consistent with thermodynamic predictions derived from the Miedema model. Scanning electron microscopy (SEM) revealed a dendritic structure in the undoped alloy, which was replaced by Cu- and Cr-rich regions in the 5% Nd-doped alloy, as confirmed by energy dispersive spectroscopy (EDS). Differential scanning calorimetry (DSC) indicated an endothermic peak in the undoped alloy and minor thermal responses in Nd-doped samples, without distinct phase transitions within the 0–800 °C range. Mechanical testing demonstrated substantial enhancements in both hardness and tensile strength with increasing Nd content. The 5% Nd-doped alloy exhibited the highest performance, achieving a Vickers hardness of 370 HV and a tensile strength of 1186 MPa. Magnetic testing indicated ferromagnetic behavior in all samples, with Nd additions significantly enhancing magnetic properties. Notably, the 5% Nd-doped alloy achieved a saturation magnetization (Ms) of 41 emu/g and a coercivity (Hc) of 6.3 Oe, highlighting improved magnetic softness and rapid magnetization loss characteristic of soft magnetic materials.

AtıfScopus2·WoS1·OpenAlex1

İncele

ALMisned, Ghada; Yayla, Nihal; Albayrak, M. Gökhan; Güler, Ömer; Sen Baykal, Duygu; Alkarrani, Hessa; Susoy, Gulfem; Tekin, H.O.

Oxide dispersion-strengthened alloys have emerged as a highly effective solution to address the physical, structural, and shielding challenges faced by traditional alloys in nuclear environments. This study presents a comprehensive evaluation of the microstructural, mechanical, and radiation shielding properties of Yb2O3 oxide dispersion-strengthened 316L stainless steel composites at varying Yb2O3 concentrations such as 1%, 5%, 10%, and 20% by weight. XRD analysis revealed lattice distortions, with crystallite sizes decreasing from 11.2267 nm to 9.3351 nm. SEM/EDX analyses confirmed homogeneous Yb2O3 dispersion at lower concentrations, with agglomeration at 20% Yb2O3. The mass attenuation coefficient increased from 56.103 cm2/g to 65.919 cm2/g at 0.015 MeV, marking a 17.5% enhancement. HVL decreased by 40.68% at 0.2 MeV for the 20% Yb2O3 sample. Additionally, the 20% Yb2O3 composite showed nearly 33% lower transmission factor at 3.0 cm thickness and 0.662 MeV. It can be concluded that Yb2O3 reinforcement significantly enhances the microstructural, and gamma-ray attenuation properties of 316L-SS composites, positioning them as promising materials for advanced nuclear shielding and structural applications.

AtıfScopus5·OpenAlex5

İncele

Özkul, İskender; Karaduman, Oktay; Şimşek, Tuncay; Şimşek, Telem; Canbay, Canan Aksu; Güler, Ömer; ALMisned, Ghada; Baykal, Duygu Sen; Tekin, Huseyin Ozan

High-entropy alloys (HEAs) are a novel class of materials known for their complex compositions and exceptional multifunctional properties. In this study, NiCoMnTi-based HEAs were modified with Fe, Cr, and Cu as fifth elements to systematically investigate their structural, magnetic, thermodynamic, and nuclear radiation shielding characteristics. The alloys were synthesized via arc melting and characterized using XRD, SEM-EDS, VSM, and theoretical modeling methods. The findings reveal that each additional element uniquely alters the alloy’s properties. The Fe-containing alloy exhibited a well-defined lamellar microstructure, the highest saturation magnetization (10.79 emu/g), and a Curie temperature near 450 K, along with strong gamma-ray shielding performance across both low and high energy ranges. The Cr-containing alloy demonstrated soft magnetic behavior, featuring the lowest coercivity (29.64 Oe) and the highest fast neutron removal cross-section. In contrast, the Cu-containing alloy enhanced low-energy photon attenuation due to its higher atomic number but exhibited limited magnetic homogeneity. Despite these differences, all samples displayed stable thermodynamic behavior and comparable buildup factor trends. Overall, the addition of Fe led to a synergistic improvement in both magnetic and radiation shielding capabilities of the NiCoMnTi-based HEA system.

AtıfScopus3·OpenAlex3

İncele

Özkul, İskender; Karaduman, Oktay; Şimşek, Telem; Şimşek, Tuncay; Canbay, Canan Aksu; Güler, Ömer; Şan, Mert Hüseyin; ALMisned, Ghada; Tekin, H.O.

This study investigates the thermal, structural, magnetic, and radiation shielding properties of CuAlNi-based high-temperature shape memory alloys (HTSMAs) enhanced through sequential alloying with Co, Fe, Mn, and Cr. Five different variants were produced, designated as CRef (reference CuAlNi alloy), CCo (CuAlNiCo), CFe (CuAlNiCoFe), CMn (CuAlNiCoFeMn), and CCr (CuAlNiCoFeMnCr). Differential scanning calorimetry (DSC) confirmed the presence of reversible martensitic transformations in all alloys, with Co and Mn additions significantly enhancing thermal stability. Structural analyses using X-ray diffraction (XRD) and microscopy showed significant grain refinement and phase transitions, while magnetic measurements highlighted the strong ferromagnetic response of CCo (CuAlNiCo) and the increased coercivity of CMn (CuAlNiCoFeMn) due to domain-pinning effects. Moreover, radiation shielding analyses demonstrated the critical influence of density and elemental composition, with CRef exhibiting superior linear attenuation coefficients (LAC), effective atomic number (Zeff), and energy absorption buildup factor (EBF) performance, attributed to its optimized Cu fraction and high density (7.1296 g/cm3). In contrast, CMn (CuAlNiCoFeMn) showed the weakest shielding properties due to reduced density and Mn content. Among the samples, CRef emerged as the superior alloy, demonstrating exceptional multifunctionality across all evaluated parameters, while CCr (CuAlNiCoFeMnCr) displayed synergistic properties, combining shape memory behavior with competitive shielding efficiency. It can be concluded that CuAlNi-based HTSMAs hold significant potential as multifunctional materials, particularly for nuclear safety and aerospace engineering applications, where adaptive functionality and radiation protection are critical.

AtıfScopus2·OpenAlex2

İncele

ALMisned, Ghada; Yayla, Nihal; Albayrak, M. Gökhan; Güler, Ömer; Baykal, Duygu Sen; Tekin, H.O.

This study explores the development and comprehensive characterization of Al6061-Gd₂O₃ composites, designed to enhance radiation shielding and mechanical properties for critical applications in environments exposed to ionizing radiation. The purpose of this research is to assess the effectiveness of Gd2O3 as a reinforcing material for Al6061, with the aim of creating a dual-function composite that combines structural integrity with superior gamma-ray and neutron attenuation capabilities. Using X-ray diffraction (XRD) and scanning electron microscopy (SEM), we analyzed the microstructural effects of varying Gd2O3 content, observing homogeneous dispersion at low concentrations and clustering at higher levels. Mechanical properties demonstrated that increased Gd2O3 content reduces the elastic modulus, indicating a trade-off between stiffness and shielding efficiency. Radiation shielding parameters, including Transmission Factor (TF), mass attenuation coefficient (MAC), and Fast Neutron Removal Cross Section (FNRCS), were evaluated through Phy-X/PSD and PHITS Monte Carlo simulations. Results indicate that Gd2O3 reinforcement significantly improves gamma-ray and neutron shielding, particularly at higher concentrations, making the composite viable for non-structural applications prioritizing radiation protection. The findings from this study highlight the potential of Gd2O3-reinforced Al6061 composites to serve as effective shielding materials in environments where radiation exposure is a primary concern.

AtıfScopus4·OpenAlex5

İncele

Gul, Ali Oktay; Kavaz, Esra; Basgoz, Oykum; Guler, Omer; ALMisned, Ghada; Bahceci, Ersin; Guler, Seval Hale; Tekin, H.O.

This study aims to explicate the diverse roles of high entropy alloys within nuclear environments. The study extensively investigates the impact of B4C on the structural, physical, mechanical, and nuclear shielding properties of synthesized high-entropy alloys (HEAs) comprising FeNiCoCrW, GNP, and B4C. The aim is to explore the monotonic effects of B4C on the behavioural changes of the HEAs. The present study initially investigates the internal morphology and structural characteristics of the produced composites through the utilization of X-ray diffraction, scanning electron microscopy, and energy dispersive spectroscopy. The determination of coefficient of friction values is obtained via wear testing, wherein the values are measured as a function of the sliding distance. The shielding properties of nuclear radiation are determined through the experimental setups for gamma-ray and neutron radiation. The sample encoded as G2, which incorporates both B4C and GNPs as reinforcing agents, exhibits the most noteworthy mechanical properties among the samples that were examined. The findings of our study indicate that augmenting the concentration of B4C has a significant impact on the efficacy of nuclear radiation shielding. The present study infers that the B4C produced within the framework of GNPs plays a significant role in enhancing the overall characteristics of HEAs. This is particularly noteworthy in the context of nuclear applications, where HEAs are being examined as a prospective constituent of forthcoming nuclear reactors. Moreover, B4C serves as a versatile instrument in scenarios, where there is a need to enhance mechanical and nuclear shielding properties across a spectrum of radiation energies.

AtıfScopus15·OpenAlex16

İncele

Şimşek, Telem; Özkul, İskender; Canbay, Canan Aksu; Avar, Barış; Şimşek, Tuncay; Güler, Seval Hale; Özcan, Sadan; Güler, Ömer; Chattopadhyay, Arun K.

In this study structural, morphological, thermal and magnetic properties of equiatomic CoNiMnGaSi (base), CoNiMnGaSiCu, CoNiMnGaSiSn and CoNiMnGaSiSb alloys are discussed. The formation of solid-solution nanocrystalline bcc structure of the alloys was determined by XRD and DTA techniques. SEM–EDS analyses also revealed the homogeneous distribution of the elements. The room temperature magnetic hysteresis loops showed that as-casted alloys reached saturation easily with coercivity less than or equal to 35 Oe. As the Cu and Sn were added to the alloy, the saturation magnetization was decreased from 112 emu/g to 50 emu/g, which was mainly due to the substitution of non-magnetic atoms to the magnetic Co in the base CoNiMnGaSi alloy, whereas the addition of Sb to the base alloy did not have a significant effect on the Ms. The CoNiMnGaSiSb was found to have the highest Curie Temperature of 670 K, which makes the alloy a promising candidate for power industry-related applications.

AtıfScopus3·OpenAlex4

İncele

Kavaz, Esra; Gul, Ali Oktay; Basgoz, Oykum; Guler, Omer; ALMisned, Ghada; Bahceci, Ersin; Guler, Seval Hale; Tekin, H.O.

In this article the affiliation 7 was incorrectly assigned to all authors but H.O. Tekin.

AtıfScopus1

İncele