Sürdürülebilir Kalkınma Amaçları

• 1
• 1
• 1

• MakaleAçık Erişim2025Scopus SJRQ1/r/munzur/884
  Selection of the central composting facility for organic wastes through the Bayesian best worst method and Geographic information system incorporation: The case of Istanbul

  Güler, Mustafa; Samastı, Mesut; Yücesan, Melih; Gül, Muhammet; Çelik, Erkan; Ciner, Miraç Nur; Algorabi, Ömer

  The rapid increase in municipal solid waste (MSW) generation, driven by population growth and unplanned urbanization, has made the location of organic waste collection and disposal facilities a critical issue for metropolitan cities. Improper waste management practices threaten environmental sustainability, human health, and urban futures. This study applies multicriteria decision-making (MCDM) methods to identify the optimal placement for a central composting facility in Istanbul. A novel MCDM mechanism was developed, building on existing methods and addressing a gap in the literature. While determining the criteria, academic studies on this subject were researched in depth and the criteria used in these studies were brought together to obtain 28 criteria. The study assessed 28 criteria using the Bayesian Best-Worst Method (BWM) to determine their relative importance. These weights were then integrated into a Geographic Information System (GIS) to produce a suitability map, highlighting the most appropriate locations for the facility. Based on this analysis, the Çatalca Karacabey region was identified as the optimal site, ensuring reduced environmental impact and improved efficiency in organic waste management. The study contributes both theoretically and practically to the field, offering a robust framework for sustainable waste facility siting and providing actionable insights for urban governance. The study provides valuable insights for facility siting and urban governance, while highlighting areas for future research.

  • 
  • 
  AtıfScopus5·WoS4

  İncele
• MakaleAçık Erişim2024Scopus SJRQ1/r/munzur/2254
  Investigation of the effect of electrophoresis-assisted milling on machinability

  Mahmat, Aybars

  In this study, the electrophoresis-assisted milling (EAM) method, an alternative method to the conventional milling (CM) method, was proposed to increase the machinability of Ti6Al4V alloy, which is difficult to machine. The nanoparticles in the electrophoresis solution generated an electric field. This electric field collected abrasive particles around the cutting tool, and the machining quality was improved. The impacts of different cutting parameters on the performance characteristics were examined using both EAM and CM methods. The experimental results demonstrate that the proposed EAM method significantly improves these performance characteristics. In addition, increasing spindle speed increased tool wear and cutting temperature for both machining methods; It was observed that it reduced cutting force and surface roughness. It was concluded that as the feed rate increased, tool wear, cutting temperature, cutting force, and surface roughness increased. The experimental results showed that feed rate, machining method, and spindle speed affect machining quality. In conclusion, the experimental results significantly impact improving the machining performance of the EAM method.

  AtıfScopus1·WoS2·OpenAlex2

  İncele
• MakaleAçık Erişim2024Scopus SJRQ1/r/munzur/1719
  Effect of White-Portland cement containing micro and nano silica on the mechanical and freeze-thaw properties of self compacting mortars

  Etli, Serkan; Yılmaz, Tekin; Hansu, Osman

  This study concentrated to investigate the influences of white-Portland cement (W-PC) containing silica fume (SF: micro-silica (µSi) and nano-silica (nSi)) as replacement (2–4 wt%) on mechanical (strength and durability), physical and microstructural behaviors of self-compacting mortars (SCMs) fabricated at 0.48–0.63 w/b ratios. In keeping with these purposes, besides of carrying out the workability (mini-slump flow: M−SF and V-funnel: V-F) experiments of SCMs, the mechanical and microstructural tests implemented were: unconfined compressive strength (UCS), flexural strength (FS), freeze–thaw (F-T) and scanning electron microscope (SEM) analysis. The outcomes displayed that, in comparison with the control, replacing W-PC by SF (particularly nSi) enhanced the UCS and FS, resisted against F-T durability by lowering the strength losses in UCS and FS. The ameliorated microstructure resulting in a reduction in the number and/or a narrowing in the size of micro-cracks and pores contributed to generate a more compact and consolidated SCM structure for the improving of strength and durability due of pore-filling effect and superior pozzolanic characteristics of µSi and especially nSi, this in turn reduced the permeability of SCM, which has a significant effect on the strength and durability behaviors of the SCM.

  • 
  AtıfScopus16·WoS16·OpenAlex19

  İncele