Karaduman, Oktay; Özkul, İskender; Aksu Canbay, Canan

Cu-based shape memory alloys (SMAs), except for exhibiting shape recovery, superelasticity, and high damping, are desirable because these smart materials have higher electrical and thermal conductivity and much lower prices than NiTi SMAs. However, they also have some downsides in mechanical strength and brittleness (mostly stemming from their coarse grain structure) and thermal instability. Therefore, adding some grain refining elements to these SMAs to improve their shape memory effect (SME), and thermal, structural, and mechanical properties is a widespread and simple way that significantly affects their martensitic phase transitions, structure, and mechanical properties. One of these grain-refining elements is titanium. Its thermal conductivity is lower than those of Cu and Al elements and has a low solubility in Cu-matrix. Besides the effects of small Al variations, the use of minor amounts of titanium in binary CuAl-base alloys can show impressive effects on all characteristics of these shape memory alloys, such as shape memory effect properties, martensitic transformation kinetics parameters, and microstructural features. In this research work, CuAlTi ternary high-temperature shape memory alloys (HTSMAs) with new compositions were produced by the arc melting method without a complicating use of Mn or Ni components in usual ternary CuAlMn and CuAlNi shape memory alloys. Thermal analyses of the prepared samples of the alloys were investigated by using differential scanning calorimetry (DSC) and differential thermal analysis (DTA) measurements. In contrast, x-ray diffraction (XRD) test results and optical micrographs were used for analyzing the structure of the alloy samples. The effect of different amounts of low soluble and grain refining Ti element on the binary CuAl alloy system was investigated.

AtıfScopus2·WoS2·OpenAlex2

İncele

Karaduman, Oktay; Özkul, İskender; Güler, Seval Hale; Aksu Canbay, Canan

In this study, two high-temperature shape memory alloys (HTSMAs) of CuAlV with unprecedented chemical compositions were fabricated using the arc melting technique, followed by traditional ice-brine water quenching after the melting process. To characterize the shape memory properties and structure of the alloys, a series of tests including differential calorimetry (DSC and DTA), EDS, optical microscopy, and XRD were conducted. The DSC tests, performed at different heating and cooling rates, demonstrated highly stable reversible martensitic phase transformation peaks at high temperatures, which were also confirmed by the results of DTA tests. Microstructural XRD and optical microscopy tests were conducted at room temperature, revealing the martensitic structure of the alloys in both cases. Based on all the results, the effects of different minor amounts of vanadium additives directly on the CuAlV alloy were discussed.

AtıfScopus2·WoS2·OpenAlex3

İncele

Karaduman, Oktay; Boyrazli, Mustafa; Canbay, Canan Aksu; Özkul, İskender; Çelik, Emrah; Başbağ, Güneş

For the first time, CuAlVMg high-temperature shape memory alloy (HTSMA) with unprecedented alloy composition and with extended solubility of vanadium element was fabricated as-cast ingot by arc melting method, then homogenization of the alloy in high β-phase temperature region and quenching in iced-brine water were performed, respectively. The characteristic forward martensite to austenite martensitic transformation (MT) temperatures were detected at around 390 °C, which put the novel alloy in the category of HTSMAs. The thermal response of the alloy at high-temperatures was observed by DTA test as coherent with usual Cu-based HTSMAs. The residual sub-eutectoid precipitations emerging at around 500 °C hindered the direct martensitic transformation. The martensite structure of the alloy was revealed by XRD, SEM and optical microscopy tests.

İncele

Say, Yakup; Dikici, Burak; Kaseem, Mosab; Özkul, İskender; Güler, Ömer

CoCrFeNi alloy is the most well-known four-component equiatomic alloy. In addition, it has a low-cost composition among HEAs. Four-component alloys are considered semi-HEAs. Therefore, a five-component HEA design was made by adding another metal to the main composition of CoCrFeNi. As the fifth metal, two metals such as Al and Ti, which are relatively low in cost and have the potential to improve properties, were chosen. For this purpose, in this study, the effect of Al and Ti on CoCrFeNi main alloy was investigated by producing three different samples as CoCrFeNi, CoCrFeNiAl, and CoCrFeNiTi. The alloys with three different compositions (used three different samples) were successfully produced by the mechanical alloying method. Although Al and Ti have the possibility of intermetallic with other metals in the alloy, such a formation was not observed during mechanical alloying, and it was observed that all metals were homogeneously distributed in the alloy. The microhardness results indicated that CoCrFeNiAl and CoCrFeNiTi samples had similar hardness values. While the hardness of the CoCrFeNi sample was 136 HV, the hardness of the CoCrFeNiAl sample was 262 HV. However, the hardness of the CoCrFeNiTi sample decreased significantly. The hardness of the CoCrFeNiTi sample was measured as 269 HV. It was observed that the addition of Ti and Al to the base alloy was increased a significant change in hardness. It has been observed that Ti supplementation has a more positive effect on improving corrosion properties. It is seen that the corrosion potentials shift toward more negative potentials with the addition of Al and Ti to the CoCrFeNi (−194 mV) alloy (−306 and −224 mV for CoCrFeNiAl and CoCrFeNiTi, respectively). When the surface morphologies of the alloys are compared after corrosion; the damage to the alloy surfaces increases due to the negative Ecorr value in CoCrFeNiAl and CoCrFeNiTi alloys compared to the master alloy. However, the high corrosion current density (12.69 µA/cm2) in the CoCrFeNiTi sample caused much more damage to this alloy. Graphical Abstract: (Figure presented.)

AtıfScopus14·OpenAlex16

İncele

Özkul, İskender; Boyrazli, Mustafa; Aksu Canbay, Canan; Başbağ, Güneş; Karaduman, Oktay

Shape memory alloys (SMAs) constitute the second largest commercial smart material class after piezoelectric materials. Different SMA alloy systems or SMAs with miscellaneous functionalities and characteristic properties have been designed for using in different applications until today. High temperature shape memory alloys (HTSMAs) are also widely desired to be used in various smart materials applications. HTSMAs with different functional and characteristic properties are muchly demanded for different tasks to be done by these alloys or devices designed by these alloys. A common and practical way to fabricate SMAs or HTSMAs with different shape memory effect (SME) and other properties is to fabricate them with different alloying compositions and add different additive elements. In this work, a quaternary CuAlZnMg HTSMA with an unprecedented composition consisting minor amount of zinc and magnesium additives was produced by arc melting method. As a result of applying post-homogenization in high β–phase temperature region and immediate quenching, the microstructural mechanism of a SME property was formed in the produced alloy. After then, to examine SME characteristics of the CuAlZnMg alloy some differential thermal analysis (DTA), microstructural (XRD) and magnetization (VSM) characterization tests were carried out. The DTA results showed that the alloy is a HTSMA exhibiting reverse martensitic transformations at temperature range between 167 °C and 489 °C. The XRD pattern obtained at room temperature revealed the martensite phases formed in the alloy, which phases are the base mechanism of the reversible martensitic transformation (the SME property) of the alloy. The VSM test showed that the alloy exhibit a diamagnetic property with a weak ferromagnetic coercivity contribution.

İncele

Başbağ, Güneş; Karaduman, Oktay; Canbay, Canan Aksu; Özkul, İskender; Boyrazlı, Mustafa

In this work, the new quaternary CuAlTiMg high-temperature shape memory alloy (HTSMA) with an unprecedented composition and with extended solubility of Ti was produced by the arc melting method. The thermal shape memory effect characterization tests were done by performing a series of differential calorimetric (DSC and DTA) measurements. The obtained thermograms of the alloy displayed the martensitic phase transformation peaks. The forward (martensite to austenite) phase transformation was found to occur at above 350◦C, which qualifies the produced alloy as an HTSMA. The microstructural XRD measurement was performed to reveal the atomic planes of martensite structures formed in the alloy, which constitute the shape memory effect property of the fabricated alloy. The alloy surface was monitored by optical microscopy image taken at room temperature, and finely dispersed Ti-rich X-phases were observed.

İncele

Güler, Ömer; Kavaz, E.; Güler, Seval Hale; Almisned, Ghada; Özkul, İskender; Basgoz, Oykum; Tekin, H.O.

The oxide dispersoids within ODS alloys can act as sinks for radiation-induced defects, such as vacancies and dislocation loops, effectively reducing their mobility and preventing their accumulation. This property is crucial for HEAs employed in radiation-intensive environments, such as nuclear reactors. The objective of this research is to examine the impact of rare earth elements (REE) such as Y2O3, Er2O3, Pr2O3, and Sm2O3, on Oxides Dispersion-Strengthened (ODS) FeCoNiCuZn High Entropy Alloys (HEAs). The mechanical alloying technique is employed to produce a high entropy alloy consisting of Fe, Co, Ni, Cu, and Zn in their raw form. Subsequently, the raw alloy powder is enriched with separate amounts of Y2O3, Er2O3, Pr2O3, and Sm2O3. The microstructural analysis of the samples obtained from the mechanical alloying process was performed utilizing the X-ray diffraction (XRD) technique. In addition, scanning electron microscopy (SEM) was employed to analyze the ODS-HEA samples encoded S1, S2, S3, S4, and S5. To investigate the transmission properties of gamma-ray and neutron radiation, experimental studies are carried out using two types of detectors: Ultra High Purity Germanium (HPGe) detector and Canberra NP-100B BF3 gas proportional detector, respectively. The X-ray diffraction (XRD) spectra of samples did not display any observable peaks that could be attributed to the presence of dispersed rare earth element (REE) oxides. The uniform distribution of the metallic constituents that make up the High Entropy Alloy (HEA) is observed in the samples. Additionally, it can be observed that the implementation of the ODS-HEA technique, incorporating a 3% (wt.) Er2O3 additive, results in the most advantageous results with respect to the characteristics of gamma ray absorption. The S3 sample demonstrated the greatest degree of neutron absorption, as demonstrated by a recorded value of 0.857 μSv/h, where the S1 sample demonstrated the minimum level of absorption, as evidenced by a recorded value of 0.452 μSv/h. Based on the observed effects on neutron and gamma-ray attenuation behaviors in ODS-HEAs, it can be concluded that Er2O3 exhibits characteristics of a monotonic oxide. This feature is particularly advantageous for applications that necessitate a dual enhancement in these behaviors. It can also be concluded that the S1 sample may be deemed appropriate for situations where the utmost consistency of chain reactions in nuclear reactor fuel rods is desired, due to its possession of the lowest neutron absorption properties.

AtıfScopus22·OpenAlex26

İncele

Şimşek, Telem; Özkul, İskender; Canbay, Canan Aksu; Avar, Barış; Şimşek, Tuncay; Güler, Seval Hale; Özcan, Sadan; Güler, Ömer; Chattopadhyay, Arun K.

In this study structural, morphological, thermal and magnetic properties of equiatomic CoNiMnGaSi (base), CoNiMnGaSiCu, CoNiMnGaSiSn and CoNiMnGaSiSb alloys are discussed. The formation of solid-solution nanocrystalline bcc structure of the alloys was determined by XRD and DTA techniques. SEM–EDS analyses also revealed the homogeneous distribution of the elements. The room temperature magnetic hysteresis loops showed that as-casted alloys reached saturation easily with coercivity less than or equal to 35 Oe. As the Cu and Sn were added to the alloy, the saturation magnetization was decreased from 112 emu/g to 50 emu/g, which was mainly due to the substitution of non-magnetic atoms to the magnetic Co in the base CoNiMnGaSi alloy, whereas the addition of Sb to the base alloy did not have a significant effect on the Ms. The CoNiMnGaSiSb was found to have the highest Curie Temperature of 670 K, which makes the alloy a promising candidate for power industry-related applications.

AtıfScopus3·OpenAlex4

İncele