Sürdürülebilir Kalkınma Amaçları

• 1
• 1
• 1

• Derleme MakaleAçık Erişim2022Scopus SJRQ1/r/munzur/2529
  Inverted Solar Stills: A Comprehensive Review of Designs, Mathematical Models, Performance, and Modern Combinations

  Hussein, Ahmed Kadhim; Rashid, Farhan Lafta; Abed, Azher M.; Al-Khaleel, Mohammad; Togun, Hussein; Ali, Bagh; Akkurt, Nevzat; Malekshah, Emad Hasani; Biswal, Uddhaba; Al-Obaidi, Mudhar A.

  Fresh water is scarce, making it a worldwide issue. In order to address global freshwater demand, a filtration technique is needed. Solar distillation (SD) that purifies brackish and sub-terranean water has been proven to be a promising green technology. It produces distilled water which can be used as potable water for drinking and other purposes. The designs, operations, and configurations of several inverted solar stills are thoroughly examined in this article. All techniques for solar water distillation to separate saltwater from freshwater have the same fundamental idea. It has been demonstrated that for a specified mass of water in the top basin, the daily output of an inverted absorber double-basin solar still (IASS) grows with increasing water depth in the bottom basin. Nevertheless, as the water depth in the bottom basin rises from 1 cm to 5 cm, the output of an inverted absorber double-basin solar system falls by about 27%. At water depths of 4, 6, and 8 cm, the daily yields from inverted absorber solar stills paired with a refrigeration cycle (RIASS) were 6.4, 10.08, and 9.5 L/day, respectively. The results also showed a substantial rise in water temperature in the inverted absorber solar still as a result of lower bottom heat loss and larger absorptivity. In this study, the emphasis on energy, efficiency, and environmental concerns remains with the modified multi-wick basin-type inverted absorber solar panel. The performance of the inverted trickling solar still was assessed with a 60 ppm average salinity under various sun radiation, feed water flow rate, and existence conditions for natural convection. It was found that the still could produce 2.55 L/day m2 of fresh water, a 15% increase. Brackish water with a salinity of 6000 ppm was used to test the still in November at tilt angles of 47◦ and 32◦ . Condensate production at the specified angles was 2.8 and 2 L/d, respectively. A total output of 6.907, 5.681, and 4.650 kg/m2 /day was also generated using the modified multi-wick basin-type inverted absorber solar still (MMWBIASS) at water depths of 1, 2, and 3 cm, respectively. With black cotton wicks, the MMWBIASS had a total thermal efficiency of 34.04%, 28.17%, and 23.61%.

  • 
  • 
  • 
  AtıfScopus43·OpenAlex47

  İncele
• MakaleAçık Erişim2022Scopus SJRQ1/r/munzur/2414
  Numerical investigation the hydrodynamic parameters of the flow in a wavy corrugated channel using different turbulence models

  Akbari, Omid Ali; Haghjoo, Hossein; Abed, Azher M.; Karimi, Mahsa; Maghzian, Ali; Shabani, Gholamreza Ahmadi Sheikh; Anvari, Amirmasoud; Akkurt, Nevzat; Toghraie, Davood

  In this research, turbulent flow numerical models in a wavy channel were investigated. The studied channel is simulated in two dimensions and symmetrically in the range of Reynolds numbers from Re=10,000 to 80,000. The significant cause of this research is to investigate and determine the appropriate method for estimating the behavior of turbulent flow in a wavy channel. In this research, the behavior of turbulent flow in a wavy channel will be simulated in 7 different ways, which are k-ω SST, k-ϵ RN, k-ϵ Realizable, k−ϵ Standard, k-ω Standard, Reynolds stress and Spalart-Allmaras. The findings of this research show that the impacts of the presence of flow viscosity (friction) and the presence of adverse pressure gradients are factors that strongly affect the velocity profiles in the upstream areas of the corrugated section. Among the studied models, due to better compatibility and guessing of flow and hydrodynamic properties, k-ω SST methods and Reynolds and Spalart-Allmaras stress are introduced as the best methods for such geometries. On the other hand, increasing the accuracy of other turbulence methods is related to the flow physics and geometric structure of each problem. In this research, the hydrodynamic parameters of the flow such as pressure drop, skin friction factor, and dynamic pressure drop coefficient and vortex contours, and pressure are plotted and described.

  AtıfScopus7·OpenAlex8

  İncele