Albayrak, Muhammet Gökhan; Güler, Ömer; Güler, Seval Hale; Evin, Ertan; ALMisned, Ghada; Sen Baykal, Duygu; Alkarrani, Hessa; Susoy, Gulfem; Kilic, Gokhan; Tekin, Hüseyin Ozan

This study explores the physical, structural, and radiation shielding enhancements in Inconel 718 superalloys reinforced with 1 wt% Y2O3 and varying Pr2O3 contents from 0 to 10 wt%, respectively. X-ray diffraction analysis confirmed preservation of the face-centered cubic structure, with increasing Pr2O3 inducing peak broadening and partial amorphization. The scanning electron microscopy/energy-dispersive X-ray spectroscopy results verified the homogeneous dispersion of oxides without agglomeration. Gamma-ray shielding parameters, including the mass attenuation coefficient (MAC), half-value layer, and effective atomic number, significantly improved with higher Pr2O3 content, particularly at low to mid photon energies. The 718Y-10PO sample exhibited the lowest transmission factors and the highest MAC values across all the tested energies. Buildup factors decreased in the Pr-rich samples, confirming reduced photon scattering. Notably, the fast neutron removal cross section for 718Y-10PO as 0.15521 cm−1 exceeded the benchmark materials like graphite and B4C. These findings establish the 718Y-10PO alloy as a promising candidate for advanced nuclear shielding applications, combining structural integrity with promising gamma and neutron attenuation capabilities.

İncele

ALMisned, Ghada; Susoy, Gulfem; Baykal, Duygu Sen; Alkarrani, Hessa; Güler, Ömer; Issa, Shams A.M.; Zakaly, Hesham M.H.; Tekin, H.O.

This study explores the gamma-ray and neutron shielding properties and mechanical performance of eight Fe-based alloys with varying elemental compositions and densities. Different parameters such as mass attenuation coefficients, linear attenuation coefficients, half-value layer, tenth-value layer, mean free path, fast neutron removal cross-sections, transmission factors were analysed using PHITS and Phy-X/PSD codes. Moreover, elastic modulus values were calculated for each alloy sample. Our results reveal that the S9 alloy, with high density and tungsten contribution, exhibited superior shielding and mechanical properties, achieving the lowest TF, HVL, and TVL values. In contrast, the low-density S1 alloy performed weakest, reflecting its lighter elemental composition. Intermediate alloys like MAR-302 and Cupero-Nickel showed balanced performance, suitable for moderate shielding needs. Strong correlations between elemental compositions, particularly high-Z elements like tungsten and boron, and shielding efficiency were observed. It can be concluded that optimizing elemental composition and density is critical for designing alloys with enhanced multifunctional properties.

AtıfScopus3·OpenAlex2

İncele

ALMisned, Ghada; Susoy, Gulfem; Baykal, Duygu Sen; Kilic, G.; Güler, Ömer; Tekin, H.O.

This comprehensive study investigates the radiation attenuation properties of various bismuth (Bi) and lead (Pb) based alloys, with a focus on identifying superior shielding materials for nuclear safety and industrial radiation protection. The research encompasses an in-depth analysis of seven alloys, namely GTSB5, Sn%40Bi, Bi50Sn50, A1, PbAl-4, Safe Alloy, and P1, assessing their efficacy in gamma-ray and neutron attenuation. Utilizing some computational tools, various parameters such as mass and linear attenuation coefficients, half and tenth value layer values, effective atomic and electron numbers, buildup factors, and transmission values were evaluated. Our findings highlight Alloy P1's outstanding performance, attributed to its high density (11.05 g/cm3) and optimized elemental composition, including Silver (Ag). In addition, P1 demonstrates exceptional gamma-ray attenuation across multiple energy spectra and superior neutron shielding capabilities, evidenced by its significant fast neutron removal cross-section (∑R, 0.12003 1/cm). The study revealed that the addition of Ag enhances the photon and beta particle absorption capacity, positioning P1 as a promising material in radiation shielding applications. The correlations between alloy density and gamma-ray shielding properties were particularly notable, with P1's density contributing to its enhanced attenuation capabilities. Furthermore, P1's lower half value layers (1.14469 cm) and tenth value layers (3.80256 cm) at 15 MeV indicate its efficiency in reducing radiation intensity with minimal material thickness.

AtıfScopus3·OpenAlex3

İncele

ALMisned, Ghada; Yayla, Nihal; Albayrak, M. Gökhan; Güler, Ömer; Sen Baykal, Duygu; Alkarrani, Hessa; Susoy, Gulfem; Tekin, H.O.

Oxide dispersion-strengthened alloys have emerged as a highly effective solution to address the physical, structural, and shielding challenges faced by traditional alloys in nuclear environments. This study presents a comprehensive evaluation of the microstructural, mechanical, and radiation shielding properties of Yb2O3 oxide dispersion-strengthened 316L stainless steel composites at varying Yb2O3 concentrations such as 1%, 5%, 10%, and 20% by weight. XRD analysis revealed lattice distortions, with crystallite sizes decreasing from 11.2267 nm to 9.3351 nm. SEM/EDX analyses confirmed homogeneous Yb2O3 dispersion at lower concentrations, with agglomeration at 20% Yb2O3. The mass attenuation coefficient increased from 56.103 cm2/g to 65.919 cm2/g at 0.015 MeV, marking a 17.5% enhancement. HVL decreased by 40.68% at 0.2 MeV for the 20% Yb2O3 sample. Additionally, the 20% Yb2O3 composite showed nearly 33% lower transmission factor at 3.0 cm thickness and 0.662 MeV. It can be concluded that Yb2O3 reinforcement significantly enhances the microstructural, and gamma-ray attenuation properties of 316L-SS composites, positioning them as promising materials for advanced nuclear shielding and structural applications.

AtıfScopus5·OpenAlex5

İncele

ALMisned, Ghada; Susoy, Gulfem; Sen Baykal, Duygu; Alkarrani, Hessa; Güler, Ömer; Tekin, H.O.

This investigation assesses the gamma-ray and neutron attenuation properties of various alloys, including Pb90Cu10, A5, Manganin-R, Cu0.2Ag0.8, SA4, and W-based, to uncover efficient and cost-effective radiation shielding materials. Our study centers on alloys featuring elements such as lead, molybdenum, silver, and tungsten, selected for their unique protective qualities against radiation. Employing computational methods to evaluate critical parameters like mass attenuation coefficients, half-value layers, linear attenuation coefficients, and effective atomic numbers, transmission factor, we found the W-based alloy to exhibit exceptional shielding properties, primarily due to its tungsten content. Interestingly, this alloy also demonstrated the highest elastic modulus among the samples studied, indicating a potential synergy between an alloy's mechanical strength and its radiation shielding effectiveness. It can be concluded that alloys with higher elastic moduli not only offer better resistance to radiation-induced deformations, enhancing shielding, but also underscore the need for further research on alloys that balance performance, affordability, and environmental impact. The findings underscore the dual importance of composition and mechanical properties in advancing radiological safety and suggest continued investigation into the sustainability and practicality of effective shielding materials.

AtıfScopus28·OpenAlex31

İncele