Demirelli, Kadir; Barım, Esra; Tuncer, Hülya; Dere, Ayşegül; Canbay, Canan Aksu; Karaduman, Oktay; Al-Sehemi, Abdullah G.; Al-Ghamdif, Ahmed A.; Yakuphanoğlu, Fahretttin

The synthesis of poly[4-(4-vinylbenzyl)oxy)phthalonitrile-co-styrene] [P(VBOPN5 %-co-St)] was carried out by free radical polymerisation at 60 °C. The successful formation of a green coloured single-chain polymer molecule with the formation of cobalt phthalocyanine (SCP-CoPc) was performed at 140–150 °C in the presence of dilute cyclohexanol. The characterization of SCP-CoPc was confirmed by FT-IR and UV/vis spectroscopic techniques. The absorption filtration process of the SCP-CoPc polymer/Sudan III composite was investigated. The introduction of Sudan III into the SCP-CoPc polymer matric strongly affected the optical transmission spectrum of the composite films. The optical transmission measurements of the SCP-CoPc/Sudan III thin film show a high absorption in the visible region (400–800 nm). In the SCP-CoPc/Sudan III composites, the optical band gaps (Eg1 and Eg2) of each of its components has changed significantly. The Eg1 and Eg2 were found to be between 1.90 and 2.83 eV, respectively. Depending on the sudan III content, a wide range from 600 nm to 730 nm indicates complete absorption filtration. The dc electrical conductivity and dielectric behavior of the SCP-CoPc/Nanografene (NG) 6 wt% nanocomposite increased with increasing temperature. From the dc conductivity plot, the Ea values of I. and II. regions were found to be 0.75 eV and 0.27 eV, respectively and it was found that the calculated activation energy obeyed the Arrhenius relationship. The refractive index and the optical permittivity of SCP-CoPc/NG 6 wt% have been estimated.

AtıfScopus2·OpenAlex3

İncele

Demirelli, Kadir; Dere, Ayşegül; Barım, Esra; Tuncer, Hülya; Yakuphanoğlu, Fahrettin

MXene based ternary composite photonic device was fabricated and characterized for the detection of different illuminations. The single chain polymer-cobalt phthallocyanine (SCP-CoPc) carrying metallised pthalocyanine macro ring was used as a polymer for the preparation of ternary composite. The Fourier Transform Infrared Spectroscopy (FT-IR), Transmission Electron Microscopy (TEM), Scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX) were used to differentiate MXene/ZnO/SCP-CoPc composite prepared. The presence of Ti, C, O, Zn and Co elements in the structure of the composite was confirmed by EDX. The electrical properties of planar interdigital coated MXene/ZnO/SCP-CoPc (1:1:1 by wt) were investigated for photovoltaic application. The photo-generated carriers contribute to the current flow, and the linear photoconductivity behaviour in current measurements with different illuminations such as 20, 40, 60, 80 and 100 mW/cm2 indicates the possible photo device use of MXene/ZnO/SCP-CoPc nanocomposite. The photocurrent increased from 20 mA/cm2 to 100 mA/cm2 with the light intensity at 0.5 V was tuned from 28 to 280 μA. The forbidden energy gap (Eg) value of the MXene/ZnO/SCP-CoPc ternary composite from optical measurements was found to be 2.36 eV. Experimental results showed that the presence of SCP-CoPc and ZnO (zinc oxide) in the ternary nanocomposite increased the ε' and ε" values of MXene. The ε′ and ε″ of the ternary composite is 13.0, 26217 at 1 kHz and room temperature, respectively. The current-time results suggest that MXene based ternary composite photonic device is a self driven photodevice as the device can detect light without any external voltage bias.

AtıfScopus6·OpenAlex6

İncele

Coğalmış, Fatma Tuba; Demirelli, Kadir; Barım, Esra; Ük, Nida; Ünlü, Caner; Şenkal, Bahire Filiz; Dere, Ayşegül; Tuncer, Hülya; Yakuphanoğlu, Fahrettin

Polyaniline-carbon dot (CD/PANI) composites were prepared via in-situ oxidative polymerization of aniline in the presence of carbon dots, with specific concentrations carefully controlled during synthesis. The composite was characterized using spectroscopic (FT-IR), morphological (TEM, SEM) and electrical methods. Impedance analysis was employed to investigate the transport behavior of charge carriers in the frequency range of 500 Hz to 10 MHz at 25 °C. This study provides a comprehensive analysis of the dielectric properties of the CD/PANI composite, including dielectric constant, dielectric loss, loss factor, AC conductivity, admittance, impedance, and Cole–Cole plots. The dielectric constant of the CD/PANI composite was 6.97 for 1 kHz at 0.5 V and 12.87 for 1 kHz at 5 V. The values indicate that the increase in the dielectric constant of nanocomposite with increasing voltage. This suggests that CD/PANI composite is a dielectric material whose dielectric constants are controlled by applied voltage. Notably, the dielectric constant increased with rising applied voltage and decreased with increasing frequency. Current-voltage (I-V) measurements revealed that the composite's dielectric parameters could be tuned by varying the applied DC voltage, suggesting its potential as a voltage-dependent dielectric (VDD) material for capacitor applications. Furthermore, the enhanced electrical conductivity indicates that the CD/PANI composite is a promising candidate for next-generation dielectric devices.

AtıfScopus7·OpenAlex7

İncele

Yıldırım, Turgay; Barım, Esra; Tuncer, Hülya; Demirelli, Kadir

Polymethyl methacrylate (PMMA)/Congo Red (CR) and polyvinyl chloride (PVC)/CR composite films were prepared on optical glass by the drop method for optical measurements and also prepared as tablets under pressure for dielectrical measurements. The optical transmission spectra measurements for PMMA and PVC film doped with CR showed a highly absorption in the ultraviolet-visible (UV-Vis) optical range (at 353 nm and 518 nm) and considerably blocking in broad visible range (190 nm–640 nm). PMMA/CR and PVC/CR composite films containing congo red at a concentration of 1 wt% showed maximum absorption bands at 290 nm and 416 nm, but their transmittance percentages were reasonably reduced compared to those of pure PMMA and PVC. Both of composites indicated high transmittances between 640 nm and 800 nm. The optical constants of the PMMA/CR and PVC/CR composite films such as optical band energy gaps (Eg) estimated using Tauc’s model, refractive index and reflectance (%) were calculated. UV–Vis, Fourier transform infrared spectroscopy (FTIR) and Thermogravimetry Analysis (TGA) measurements were used to confirm the breakdown of the -N = N- azo group bonds attached to the aromatic ring as a result of thermal decomposition of CR at 500 °C, and it was suggested that N2 gas was eliminated from the CR above 360 °C. The dielectric plots showed that the dielectric constant increased when the CR is doped up to 70 wt% in the polymer matrices. A further increase in the doping concentration of CR resulted in an increase of the dielectric constant. The dielectric constant decreased with an increase in the frequency for all of the samples. The ac (alternating current) conductivity values of PMMA and PVC showed an increase with increasing CR dopant in the polymer composites, while the ac conductivity values were found to be values between those of the pure polymers and CR.

AtıfScopus4·WoS4·OpenAlex5

İncele

Demirelli, Kadir; Barım, Esra; Tuncer, Hülya; Barım, Gamze; Abubakar, Abdullahi Musa

Copolymers of N-(2-acetylbenzofuran-3-yl) methacrylamide (BFMAA) and ethyl methacrylate (EMA) were prepared by radical copolymerization. The composition of copolymers was estimated by 1H-NMR spectroscopy. The composites of P(BFMAA39-co-EMA) [COP1] and P(BFMAA15-co-EMA) [COP2] loaded 18 wt% graphite oxide (GO) were prepared utilizing Ultrasonic Homogenizer Sonicator Processor. The FT-IR, DSC, TGA and SEM techniques were used in the characterization of the copolymers and composites. The thermal degradation behavior of COP1 was investigated by FT-IR studies of the partially degraded copolymer. And, this copolymer was able to form a four-member amide ring and imidization via intramolecular while being heated above 340 °C. Dynamic TG analysis under argon gas was used to investigate the thermal decomposition processes of pure COP1 and COP1/GO. Two degradation models including the Flynn–Wall–Ozawa and Kissinger–Akahira–Sunose methods were used to determine the apparent activation energy of the copolymer and its composite for approximately 65% of thermal decomposition occurred between 200 and 400 °C. The results also showed that average activation energy between 111.69 and 134.25 kJ/mol was obtained. The estimated activation energy values make it possible to build a simpler approach to expose the thermal decomposition behavior of copolymer and its composite. Dielectric and electrical behaviors of the copolymer composites having a semiconductor behavior filled with graphite oxide (GO) were investigated. The activation energy values of P(BFMAA15%-co-EMA)[COP2]/GO 18 wt% and COP1/GO 18wt% from dc conductivities were 0.182 eV and 0.245 eV, respectively.

AtıfScopus6·OpenAlex8

İncele

Tuncer, Hülya; Pıhtılı, Güzin

Bu çalışmada, aromatik aminlerin, fenilizotiyosiyanat ve 4-metoksi-fenilizotiyosiyanat ile tepkimesi ile, N-sübstütiye-N’-feniltiyoüre ve türevleri sentezlendi. Daha sonra sentezlenen bu bileşikler, asidik ortamda sulu glioksal çözeltisi ile reflaks edildi ve N,N’-disübstütiye-4,5dihidroksi-imidazolidin-2-tiyon bileşikleri sentezlendi. N-sübstütiye-N’-feniltiyoürenin sentezi, geleneksel ısıtma yöntemi kullanılarak gerçekleştirildi. Tiyoüre türevlerinin sentezi hem klasik yöntem hem de mikrodalga destekli sentez yöntemiyle yapıldı. Mikrodalga destekli tepkimeler, sıcaklık ve basınç kontrollü cihazla atmosfer basınçlı ortamda gerçekleştirildi. Tüm ürünler, FT-IR ve 1 H-NMR spektroskopik analiz yöntemleri ile karakterize edildi.

İncele