Sürdürülebilir Kalkınma Amaçları
Yayınlar
- MakaleYalnız künye2022Scopus SJRQ1Numerical evaluation of the coupled/uncoupled effectiveness of a fluid-solid-thermal multi-field model for a long-distance energy transmission pipeline
Wang, Kang; Xie, Kai; Zhang, Hui; Qiang, Yujie; Du, Yanping; Xiong, Yaxuan; Zou, Zhenwei; Zhang, Mingbao; Zhong, Liqiong; Akkurt, Nevzat
As the main component of energy transmission, long-distance energy transmission pipeline (LETP), whose safety problem is becoming more and more prominent with the development of the oil and gas transportation industry, is susceptible to the traffic loading, temperature loading, pressure loading and other loadings. In this paper, the mechanical characteristics of LETP under the interaction of temperature loading and pressure loading are investigated. Based on the theory of multi-field coupling, the mathematical model of fluid-solid-thermal coupling of fluid-filled pipelines under the combined effect of temperature and pressure loadings is established and verified. Meanwhile, an equivalent model is proposed to accurately calculate the stress of any pipeline segment in LETP. The results show that the coupling of temperature loading and the pressure loading is significantly affected by the end-side constraints of the pipelines. For strong end-side constraint, the coupling effect of temperature and pressure loadings has a significant effect on the calculated equivalent stress. The difference between the stress solution under coupling effect and decoupling effect is above 30 MPa. However, for weak end-side constraints, the error is within 10 MPa. The equivalent stress can be approximated by the decoupling solution instead of the coupling solution.
AtıfScopus15OpenAlex15
İncele - MakaleYalnız künye2022Scopus SJRQ1Heat and mass transfer mechanism and control strategy of clean low carbon combustion technology in the novel-type coke oven flue with MILD combustion
Xu, Qian; Shen, Meng; Xie, Kai; Zhang, Hui; Akkurt, Nevzat; Wang, Jiulong; Xiong, Yaxuan; Shi, Kejian; Chen, Xingli; Lv, Qian
In the field of emission reduction, considering the limitations of single clean combustion technology and joint control of carbon emission, the application of Technology of Mixed-Gas (TMG), Technology of Low-calorific Value Gas (TLVG) and Technology of Low Oxygen Combustion (TLOC) in the Novel-type Coke Oven Flue with MILD Combustion (MILD-NCOF) was realized. By adjusting the ratio of coke oven gas to blast furnace gas (α), the ratio of flue gas to gas (β) and the ratio of flue gas to air (γ), the heat and mass transfer mechanism of combustion process in MILD-NCOF was researched, the dual emission control system and the regulation strategy of pollutant and carbon emissions were established. The results showed that with the increase of α, β and γ, the fluidity of gas and the reaction rate of combustible components in the fire path were improved, the heat and mass transfer was enhanced, and the effect of dual emission reduction of pollutants and carbon emissions was improved. When the mixing ratio α was 0.6, Tave was reached at 1594.93 K. The NOx concentration at the outlet was 116.34 mg/m3, and the sum of the molar concentrations of CO and CO2 at the outlet was reduced to 1.440 × 10−1. When the mixing ratio β was 2.4, Tave was reached at 1518.73 K, the NOx concentration at the outlet was 128.42 mg/m3, and the sum of the molar concentrations of CO and CO2 at the outlet was 1.127 × 10−1. When the mixing ratio γ was 0.6, Tave was reached at 1627.28 K, the NOx concentration at the outlet was 142.73 mg/m3, and the sum of the molar concentrations of CO and CO2 was reduced to 1.128 × 10−1, which could meet the dual standards of clean production and low-carbon environmental protection of MILD-NCOF.
AtıfScopus30OpenAlex36İncele - MakaleYalnız künye2022Scopus SJRQ1Numerical evaluation of convective heat transfer properties of two-dimensional rotating PCM melt in the unilaterally heated rectangular container
Liu, Dinghai; Xie, Kai; Zhang, Hui; Qiang, Yujie; Yang, Di; Wang, Zhaoxiao; Zhu, Lidong; Akkurt, Nevzat; Du, Yanping; Shen, Meng
This paper carried out numerical investigations on the flow and heat transfer characteristics of a phase change with two-dimensional rotation of the three-dimensional paraffin (RT -27)-filled rectangular encapsulated container (PCM-REC) in space. A three-dimensional transient numerical heat transfer model was established and the enthalpy method was used to simulate the solid-liquid phase transition process and the flow evolution at the PCM interface. In this paper, the solid-liquid interface distribution, temperature distribution and melting time of PCM in PCM-REC heated at a constant temperature on one side were compared when rotated at different angles (0°, arctan (0.4), 2arctan (0.4) and 90°) along the heating direction and vertical heating direction. Results demonstrated that the peak value of maximum natural convection velocity increased from 0.0072 m/s to 0.0184 m/s with increasing radial height when PCM-REC was rotated in vertical heating direction. When PCM-REC was rotated in two dimensions by the same angle, the melting time was fastest when γ was an obtuse angle, and with the increase of the obtuse angle, the melting time shortened from 17 min to 6 min; when γ was an acute angle, the melting time was slowest, and with the decrease of the acute angle, the melting time lengthened from 49 min to 288 min.
AtıfScopus35OpenAlex40İncele