Yazarlar
Yayınlar
- MakaleYalnız künye2025Scopus SJRQ2Response surface method (RSM) for optimization of electrical properties of polymer/CdS composites for dielectric capacitors
Torğut, Gülben; İncesu, Rabia
This paper aims to present the statistical evaluation of dielectric constant (έ) and conductivity (σ) performance of composites preparing Maleic Anhydride (MA) and Styrene (St) polymer with various amounts of Cadmium Sülfide (CdS) by analysis of variance (ANOVA) model. For this purpose, frequency, applied voltage and CdS amount at different weight percentages were selected as input factors while dielectric constant and conductivity of the composites were selected as the response. Analysis of input factors was performed, RSM method was designed and used for estimation of response factor. From the analysis results, we found that high values of dielectric constant and conductivity were strongly related to frequency and CdS amount. However, we found that applied voltage in the selected ranges did not have a significant effect on both factors. The structural properties of the composites were investigated by Fourier Transform Infrared Spectroscopy (FTIR). The surface morphology was investigated by Scanning Electron Microscopy (SEM). The presence of CdS in polymers has been proven by X-Ray Diffraction (XRD). The thermal properties of polymers were examined by thermogravimetric analysis (TGA).
AtıfScopus1WoS2OpenAlex2
İncele - MakaleAçık Erişim2024Scopus SJRQ2Enhanced impedance, electrical conductivity, dielectric properties for colloidal starch-g-poly (methyl methacrylate) supported with semiconductor cadmium sulfide
Torğut, Gülben; Gürler, Nedim
In this study, starch-graft-poly (methyl methacrylate) (starch-g-PMMA) composites doped with different amounts (5, 10, and 15 wt%) of cadmium sulfide (CdS) particles were fabricated for electrical measurements using in-situ polymerization technique. The structural characterization of the samples was studied. The dielectric and conductivity properties of the composites were investigated using impedance analyzer depending on the frequency (100 Hz–20 kHz) at room temperature. Spectroscopy revealed that the dielectric constant (ε′), dielectric loss (ε′′), and real (Z) components of impedance are found to decrease with increasing frequency for both starch-g-PMMA and starch-g-PMMA (5, 10, and 15 wt%) composites. On the contrary, the AC conductivity (σac) of samples increased with increasing frequency. In addition, ε′ and ε′′ values of starch-g-PMMA were lower than composites that added CdS. When the CdS content increased from 0 to 15%, ε′ increased from 5.62 to 15.10 at 100 Hz. AC conductivity was improved after adding the CdS particles. The maximum conductivity value for starch-g-PMMA15%CdS is found to be 3.07 × 10–7 at 100 Hz. When the dielectric properties of composites are evaluated, it is concluded that it is an exciting material for electronic applications in technology.
AtıfScopus9WoS8OpenAlex10İncele