Yazarlar
Yayınlar
- MakaleAçık Erişim2026Scopus SJRQ2Designing a novel FeCoNiMnCu high-entropy Alloy: Synthesis, structural evolution, magnetic behavior, and radiation shielding performance
Güler, Ömer; Şimşek, Telem; Şimşek, Tuncay; Evin, Ertan; Baykal, Duygu Sen; ALMisned, Ghada; Tekin, H.O.
In this study, a novel FeCoNiMnCu HEA was synthesized via mechanical alloying and exhibited a single-phase face-centered cubic (FCC) structure with a crystallite size of 11.7 nm and a lattice strain of 0.81 %. Magnetic characterization revealed soft ferromagnetic behavior with a saturation magnetization of 32 emu/g at 300 K, increasing to 53 emu/g at 10 K. The alloy demonstrated excellent gamma-ray attenuation, with lower half-value layer (HVL) and mean free path (MFP) values than conventional shielding materials. Notably, its fast neutron removal cross-section (ΣR = 0.1654 cm−1) outperformed standard materials such as B4C, graphite, and water in the fast neutron energy range. These findings underline the multifunctional performance of FeCoNiMnCu HEA, highlighting its strong potential for use in advanced nuclear reactor components and radiation shielding technologies.
AtıfScopus10OpenAlex6
İncele - MakaleAçık Erişim2024Scopus SJRQ1Fabrication and structural, physical, and nuclear radiation shielding properties for Oxide Dispersion-Strengthened (ODS) alloys through Erbium (III) oxide, Samarium (III) oxide, and Praseodymium (III) oxide into 316L matrix
Güler, Seval Hale; Güler, Ömer; Kavaz, E.; ALMisned, Ghada; Albayrak, M. Gökhan; Issa, Bashar; Tekin, H.O.
We report a comprehensive investigation on customization process of Oxide Dispersion-Strengthened alloys through Sm2O3, Pr2O3, and Er2O3 incorporation into 316L stainless steel matrix in terms of a desired enhancement in structural, physical, and nuclear radiation shielding properties. Oxide powders are incorporated into 316L stainless steel powder all with the same purity of 99.5%. These were Erbium oxide (Er2O3), Praseodymium oxide (Pr2O3), and Samarium oxide (Sm2O3). First, X-Ray diffraction and Scanning Electron Microscope/Energy-dispersive X-ray spectroscopy analyses are conducted in order to investigate their physical and structural properties. Next, two different experimental setups are employed using a133Ba and 241Am/Be sources for the measurements of gamma-ray and neutron transmission properties of Oxide Dispersion-Strengthened alloys. The maximum density increment is achieved through Er2O3 compared to other reinforced oxides. The detector counting value reached its minimum level when a 5% Er2O3 oxide dispersion was introduced into the 316L SS matrix. Similarly, the most significant degree of photon absorption, the highest values of mass attenuation coefficient, lowest half value layer, and most effective atomic number, were all attained by the same sample. Based on the findings derived from the investigation, it can be concluded that incorporating Er2O3 oxide into 316L steel can be considered as a viable option in terms of enhancing the critical properties of Oxide Dispersion-Strengthened alloys for extreme conditions such as nuclear reactors and other similar fields, where the behavioral attributes of the utilized materials are at utmost importance.
AtıfScopus22OpenAlex25İncele - MakaleYalnız künye2024Scopus SJRQ2Exploring critical behavioral differences in physical, structural, and nuclear radiation attenuation properties of produced High Entropy Alloy (HEA) and Refractory-High Entropy Alloy (RHEA) samples
Güler, Seval Hale; Güler, Ömer; Kavaz, E.; Almisned, Ghada; Issa, Bashar; Tekin, H.O.
Refractory-High entropy alloys (RHEAs) are known for their exceptional mechanical and radiation-resistant properties, making them promising materials for use in nuclear reactors. Their high entropy composition, which consists of multiple elements in roughly equal proportions, can create a stable microstructure that withstands high levels of radiation damage. The objective of this work is to further our comprehension of the unique behavioral, physical, structural, and nuclear radiation attenuation characteristics shown by High-Entropy Alloys (HEA) and Refractory-High entropy alloy (RHEA) materials. Accordingly, two high entropy alloy (HEA) samples through two different compositions were produced. The first composition under consideration is the typical high-entropy alloy (HEA) defined as MnCrFeNiCoMo0.5. The second composition under consideration is a refractory high entropy alloy (RHEA) characterized by the following elemental composition: TiZrNbHfVTa0.1. SEM and EDX analyses were conducted in terms of determining their physical and structural attributes. Next, a133Ba radioisotope together with a HPGe detector were utilized for gamma-ray transmission experiments. Finally, a241Am/Be source and a gas proportional detector were used for neutron absorption experiments for HEA and RHEA samples. The alloy structures displayed a unique degree of uniformity. Throughout the RHEA phase, the incorporation of refractory elements did not provide any discernible adverse impacts on the physical stability. The counting spectrum provided a clear explanation of the gamma ray absorption features shown by the RHEA (R) sample, highlighting its exceptional absorption properties. Regarding the absorption properties of neutrons, it was observed that RHEA had a comparatively reduced amount of absorption. Therefore, it can be concluded that the basic structure of RHEA grants it superior gamma-ray attenuation qualities compared to HEA. It can be concluded that RHEA demonstrates superior applicability as a material in comparison to HEA, especially in situations involving the use of fuel rods, where maintaining of neutron quantity has paramount importance for achieving optimum neutron activation.
AtıfScopus26OpenAlex29İncele