Sürdürülebilir Kalkınma Amaçları
Yazarlar
Yayınlar
- MakaleAçık Erişim2021Scopus SJRQ1Thermoset powder coating wastes as filler in LDPE – Characterization of mechanical, thermal and morphological properties
Kismet, Yilmaz; Dogan, Akar; Wagner, Manfred H.
In this study, three different electrostatic powder coating wastes of thermoset structure were used as fillers for low-density polyethylene (LDPE). The mechanical, thermal, and morphological properties of these composites materials are reported. The thermoset powder coating wastes were hydrolyzed using water and alcohol, and then 10%, 20%, and 30% by weight of the deactivated wastes were mixed with LDPE, first in a mechanical dry mixer, and subsequently homogenized by melt compounding in an extruder at about 160 °C. Standard tensile test bars and plate-shaped samples were produced from these homogeneous compounds by injection molding. The effects of adding hydrolyzed powder coating wastes on the properties of LDPE were determined by mechanical, thermal, and morphological tests. Tensile strength and perforation threshold of the sample filled with powder coating wastes decreased to some extent compared to un-filled sample. However, an increase in izod impact and bending strengths has been observed. The results of this investigation demonstrate that powder coating wastes with thermoset structure can be used as fillers in LDPE.
AtıfScopus13WoS15OpenAlex16
İncele - MakaleYalnız künye2020Scopus SJRQ1Mechanical, thermal, and morphological properties of powder coating waste reinforced acetal copolymer
Kismet, Yilmaz; Wagner, Manfred H.
The present study investigates the individual effects of three different thermosetting waste materials, used as fillers, on the mechanical, thermal and flow properties of acetal copolymers (POM). Different amounts ranging from 5% to 30% by weight of hydrolyzed powder coating recyclates were mixed as filler material in POM. The matrix and the fillers were first dry-mixed and then compounds were prepared through melt extrusion. The resulting compounds were cooled, granulated, and then standard tensile test bars were produced through use of an injection-molding machine. We investigated the mechanical and thermal properties of test specimens, and tensile strength, bending strength and impact strength were evaluated as a function of type and amount of filler material in the POM matrix. In addition, the change in melt flow index of POM/filler mixtures was determined, before and after extrusion. Furthermore, the morphology of the specimens was examined via electron microscopy. The results of this investigation are encouraging and present an innovative approach to reutilize hydrolyzed electrostatic powder coating wastes with thermoset structures as fillers in acetal copolymers.
AtıfScopus10WoS8OpenAlex13İncele - MakaleYalnız künye2018Scopus SJRQ2Mechanical and flow properties of blends of polypropylene and powder coating recyclates with and without addition of maleic anhydride
Kismet, Yilmaz; Wagner, Manfred H.
In this research, from 10% to 40% by weight of hydrolyzed powder coating recyclates were used as filler in polypropylene (PP). Firstly, PP and filler were dry-mixed and then, in order to get a homogeneous mixture, were extruded at 180°C. The resulting compounds were cooled and granulated, and by use of an injection molding machine at 180–200°C, standard tensile test bars were produced. Tensile stress, three-point bending strength, and izod impact strength of these specimens containing different types of filler and different filler concentrations were tested. The results are presented, and the effects of type and content of hydrolyzed powder coating waste on the mechanical properties of polypropylene are discussed. Also, the change in melt flow index of polypropylene as a function of filler content is analyzed. Furthermore, the bonding mechanism of filler and matrix material was examined by electron microscopy.
AtıfScopus12WoS10OpenAlex13İncele - MakaleYalnız künye2015Effect of Dried Colza Plant as a Filler on Mechanical Properties, Density and Water Absorption of Low Density Polyethylene
Kismet, Yilmaz
In this study, mixtures have been obtained by putting dried colza plant as a filling material into low density polyethylene in ratios of 10 %, 20%, 30% in weight, and standard tensile experiment samples are produced from the mixtures by using plastic injection machine. The changes in the mechanical properties, densities and water absorption capacities of the samples have been analyzed and compared. To ensure homogeneity, the mixtures are first prepared in mechanical mixers, and then passed through extrusion machines. The material is granularized at the outlet of the extrusion machine by using crushers. Finally, with the plastic injection machine, this granule material is molded on the standard tensile experiment samples.
AtıfWoS1İncele