Sürdürülebilir Kalkınma Amaçları

• 9
• 8
• 5
• 3
• 2
• 1

• MakaleYalnız künye2024Scopus SJRQ1/r/munzur/2183
  Assessment of microplastic contamination in some commercial fishes of the southern Caspian Sea and its potential risks

  Gholizadeh, Mohammad; Bagheri, Tahereh; Harsij, Mohammad; Danabas, Durali; Zakeri, Mohammad; Siddique, Mohammad Abdul Momin

  This study examined the occurrence of microplastics (MPs) in the gastrointestinal tract (GIT) of 384 fishes classified into four species from 11 sites in 2022 from the southern part of the Caspian Sea. GITs of fishes were collected and digested in H2O2 and KOH at 45 °C for 72 h. After filtration, extracted MPs were observed under a stereomicroscope, and selected MP particles were identified using FTIR. Presence of MPs was 68.98% in the GIT of the investigated fish. The mean abundance of MPs was 5.9 ± 0.9 MPs/GIT in Rutilus kutum, 9.2 ± 1.2 MPs/GIT in Chelon auratus, 3.6 ± 0.7 MPs/GIT in Alosa braschnikowi, and 2.7 ± 0.5 MPs/GIT in Vimba vimba. The predominant form of MPs was fiber (58.21%), followed by fragment (34.77%). Black (34.4%), white (19.07%), and blue (14.58%) were the most frequently detected colors of MPs. Overall, 6 MP polymers were identified, dominantly polypropylene (42.86%), polystyrene (17.86%), and cellophane (14.28%). The western part of the Caspian Sea (mostly tourist spots and urban areas) showed more MP pollution in fish compared to the eastern part. Polymer hazard index (PHI) revealed alarming microplastic contamination in the southern Caspian Sea. The PHI value of the present study showed that PES (PHI = 8403.78) and PS (PHI = 535.80) were “Extreme danger” and “Danger” risk categories, respectively.

  • 
  AtıfScopus29·OpenAlex34

  İncele
• MakaleAçık Erişim2024Scopus SJRQ1/r/munzur/2114
  Application of electrocoagulation process for the disposal of COD, NH3-N and turbidity from the intermediate sanitary landfill leachate

  Ogedey, Aysenur; Oguz, Ensar

  This study aims to determine the COD, NH3-N and turbidity disposal efficiencies from leachate in the Bingöl landfill and highlight the electrocoagulation (EC) process’s performance in removing these pollutants. After establishing that landfill leachate was intermediate aged, its characteristics were identified using physical, chemical and elemental analyses. Six parallel-connected electrode plates with stainless steel as the cathode and aluminium as the anode were used to construct an electrocoagulation cell. After a 40-min treatment interval, the optimal disposal efficiencies for COD and turbidity from the leachate were determined to be 87% and 62%, respectively, at pH 5. Following a 40-min reaction, BOD5 concentration and BOD5/COD ratio were determined to be 85.75 mg O2/L and 0.64, respectively, at pH 5. At a NaCl concentration of 10 mM, the optimum disposal efficiency for NH3-N was determined to be 33%. The reaction kinetics matched pseudo-first-order (PFO) kinetics due to high correlation coefficients (R2 = 0.93–0.99) in removing COD, NH3-N and turbidity under different experimental conditions. The optimal reaction rate constants were determined as 2.93 × 10−2 min−1, 1.92 × 10−2 min−1 and 7.3 × 10−3 min−1 for the disposal of COD, NH3-N and turbidity, respectively. Energy consumption, unit energy consumption and total consumption cost rose in the EC process when the current density was augmented from 15 to 25 mA/cm2.

  • 
  • 
  AtıfScopus14·WoS11·OpenAlex12

  İncele
• MakaleYalnız künye2024Scopus SJRQ1/r/munzur/1696
  Lanthanum-based magnetic biopolymers for brilliant green removal from aqueous solutions

  Karaaslan Ayhan, Nagihan

  In this study, lanthanum (La)-based magnetic biopolymers were synthesized, and the first adsorption study was conducted on the removal of brilliant green dye from aqueous water with these biopolymers. For the adsorption study, adsorption parameters were investigated and the ideal adsorption conditions determined for the removal of brilliant green dye from aqueous solutions are pH 11, t 60 min, m 10 mg, C0 25 mg/L, T 298 K. It was determined that the adsorption process was compatible with the single-layer Langmuir isotherm, and maximum adsorption capacity obtained according to the Langmuir isotherm was calculated as 256.41 mg/g. The adsorption process was found to be in accordance with the pseudo-second-order, and the adsorption process was explained by intra-particle diffusion. According to studies of adsorption thermodynamics, it has been established that the nature of the adsorption reaction is spontaneous, and this process is endothermic and has increasing randomness. Moreover, the reusability of magnetic lanthanum/alginate (La/Alg) biopolymers was investigated, and it was determined that the biopolymers could be used successfully. In summary, brilliant green dye has been successfully removed with simple, low-cost, environmentally friendly, and easily obtained magnetic La/Alg biopolymers. It can be stated that even low amounts of these biopolymers can be effective in the treatment of highly concentrated dye wastewaters.

  • 
  • 
  AtıfScopus1·OpenAlex1

  İncele
• MakaleAçık Erişim2023Scopus SJRQ1/r/munzur/3060
  COVID-19 safe campus evaluation for universities by a hybrid interval type-2 fuzzy decision-making model

  Baskak, Dilber; Ozbey, Sumeyye; Yucesan, Melih; Gul, Muhammet

  The fight against the COVID-19 pandemic, which has affected the whole world in recent years and has had devastating effects on all segments of society, has been one of the most important priorities. The Turkish Standards Institution has determined a checklist to contribute to developing safe and clean environments in higher education institutions in Turkey and to follow-up on infection control measures. However, this study is only a checklist that makes it necessary for decision-makers to make a subjective evaluation during the evaluation process, while the need to develop a more effective, systematic framework that takes into account the importance levels of multiple criteria has emerged. Therefore, this study applies the best-worst method under interval type-2 fuzzy set concept (IT2F-BWM) to determine the importance levels of criteria affecting the “COVID-19 safe campus” evaluation of universities in the context of global pandemic. A three-level hierarchy consisting of three main criteria, 11 sub-criteria, and 58 sub-criteria has been created for this aim. Considering the hierarchy, the most important sub-criterion was determined as periodic disinfection. The high contribution of the interval-valued type-2 fuzzy sets in expressing the uncertainty in the decision-makers’ evaluations and the fact that BWM provides criterion weights with a mathematical optimization model that produces less pairwise comparisons and higher consistency are the main factors in choosing this approach. Simple additive weighting (SAW) has also been injected into the IT2F-BWM to determine the safety level of any university campus regarding COVID-19. Thus, decision-makers will be better prepared for the devastating effects of the pandemic by first improving the factors that are relatively important in the fight against the pandemic. In addition, a threshold value will be determined by considering all criteria, and it will prepare the ground for a road map for campuses. A case study is employed to apply the proposed model, and a comparison study is also presented with the Bayesian BWM to validate the results of the criteria weights.

  • 
  AtıfScopus4·WoS3·OpenAlex2

  İncele
• MakaleYalnız künye2023Scopus SJRQ1/r/munzur/2264
  A novel two-phase group decision-making model for circular supplier selection under picture fuzzy environment

  Kaya, Sema Kayapinar

  Circular supply chain management (CSCM), which incorporates circular thinking into supply chain management, promotes supply chain sustainability by offering a novel and compelling viewpoint. In the CSCM, supplier selection is crucial in establishing a competitive edge among businesses by decreasing environmental degradation and related supply chain expenses. This paper aims to propose a novel two-phase group decision-making approach, which combines the picture fuzzy Analytical Hierarchical Process (PF-AHP) and grey Measurement of Alternatives and Ranking According to Compromise Solution (MARCOS-G) model to select railway material suppliers within the scope of circular economy perspective. In group decision-making, a picture fuzzy number-based approach aggregates individual decision makers’(DMs) opinions and provides a lower level of computing complexity and a higher level of performance. The PF-AHP has been used to produce the weights of the criteria, and the MARCOS-G technique has been used to rank the suppliers and choose the most appropriate one. The results and verification of the novel method are carried out throughout a comprehensive sensitivity analysis. For this purpose, 50 scenarios with changes in the weight values of criteria were developed. In the validation analysis, a comparison with other grey COPRAS, TOPSIS, ARAS and WASPAS methods were performed. Due to the ranking results obtained from Spearman’s correlation analyses, the MARCOS-G is almost consistent and it can be seen that the A4 remains the top supplier in all 50 scenarios.

  • 
  AtıfScopus34·WoS30·OpenAlex39

  İncele
• MakaleAçık Erişim2023Scopus SJRQ1/r/munzur/2117
  Integrating stratified best–worst method and GIS for landslide susceptibility assessment: a case study in Erzurum province (Turkey)

  Konurhan, Zekeriya; Yucesan, Melih; Gul, Muhammet

  Landslides are among the most destructive geological disasters that seriously damage human life and infrastructures. Landslides mainly occur in mountainous regions around the world. One of the key processes to reduce these damages is to uncover landslide-exposed areas through different data-driven methods such as Geographical Information System (GIS) and multi-criteria decision-making (MCDM). In the literature, there are many studies developed with these fundamental tools. In this study, unlike the literature, a new landslide susceptibility assessment model is proposed by integrating GIS with the stratified best–worst method (S-BWM). This model has four main dimensions and 16 sub-dimensions under topography, environment-land, location, and hydrological factors, weighted with the S-BWM. A network was created considering the different states that may arise in the importance weights of these dimensions in the future. The transition probabilities of these states were predicted and injected into the classical BWM. Then, maps were created for these dimensions and classifications for each sub-dimension according to the map characteristics. Finally, the most susceptive landslide locations were determined with GIS-based calculations. To demonstrate the model’s applicability, a case study was conducted for the Erzurum region, one of Turkey’s landslide-prone regions. In addition, besides the landslide map, an analysis and discussion about the spatial distribution of susceptibility classes was presented, contributing to the study’s robustness. In the results of landslide susceptibility analysis, landslides are higher in the range of about 1600–2500 m. Approximately 42% (35.59 sq. km) of the study area has high landslide susceptibility, while 58% (64.41 sq. km) has medium and low landslide susceptibility.

  • 
  AtıfScopus19·WoS17·OpenAlex18

  İncele
• MakaleAçık Erişim2023Scopus SJRQ1/r/munzur/1965
  Evaluation of metal pollution related to human health risk in freshwater snail Viviparus contectus (Millet, 1813) as a potential bioindicator species in Lake Habitat (Turkey)

  Kutluyer Kocabaş, Filiz; Göktürk Aksu, Emsiye; Kocabaş, Mehmet

  Freshwater mollusks are employed as bioindicators for the assessment of water quality in biomonitoring studies since the water quality of natural resources is crucial for humans. The freshwater snail species known as Viviparus contectus (Viviparidae: Gastropoda) is one that people eat. Here, the levels of heavy metals (Cd, Cr, Pb, As, Zn, and Cu) in water and V. contectus samples were determined. An Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES, Spectro Arcos, vertical plasma) was used for the analysing the heavy metal concentrations in water and freshwater snail samples. The results of the current investigation demonstrated that freshwater snails accumulated metals in their water and soft tissues in the following orders: Pb > Cr = Zn = Cu = Cd = As and Zn > Cu > Pb > Cd > As = Cr. Autumn was the time of year when higher amounts of heavy metals (As, Cr, Cu, Zn, and Hg) were found. Pb content in the freshwater snail samples was strongly impacted by seasonal fluctuations (P 0.05). For adults, the EDI (estimated daily intake) values were lower than the TDI (tolerable daily intake) values, and the HI (hazard index) values were below 1. Freshwater snail samples had Zn and Pb levels that were over the FAO/WHO, Turkish Food Codex, JECFA, and EC limit values. Except for Pb, the water study shows mean metal concentrations below the USEPA, Turkish Pollution Control Regulation, and World Health Organisation maximum allowed levels. Aquatic ecosystems were negatively impacted by anthropogenic activities overall, and this study can provide a helpful data set for investigations on metallic contamination in water bodies and biomonitoring in freshwater ecosystems.

  • 
  • 
  AtıfScopus7·WoS6·OpenAlex6

  İncele
• MakaleYalnız künye2022Scopus SJRQ1/r/munzur/3063
  Experimental and material characterization of composites, including waste iron and marble powder

  Gülmez, Nihan

  Due to its fine particle size, waste marble slurry originating in cutting and processing units mixes into the air after drying, causing environmental and health problems in nearby areas. On the other hand, large amounts of iron particles are generated as metalworking industry waste, affecting the environmental system. In this study, 0%, 10%, and 20% marble powder (instead of cement) and iron particles (instead of fine aggregate) were used in mixtures, and the composites produced were subjected to two different curing periods: 7 and 28 days. The physical, mechanical, microstructural, and thermal properties of the fresh and hardened composites were ascertained via bulk density, consistency, porosity, water absorption, capillary water absorption, strength tests, particle size distribution, X-ray diffraction (XRF), X-ray fluorescence (XRF), scanning electron microscopy and energy dispersive spectroscopy (SEM–EDS), and thermogravimetric analyses (TGA). The results revealed that minimum water absorption (8.5%) and porosity (19.8%) values were achieved in 28-day composites produced with 10% marble–20% iron wastes among all composites. Thus, iron particles substituted for natural aggregates were mainly responsible for the increase in mechanical performance. A maximum flexural strength of 5.9 MPa and a compressive strength of 26.7 MPa were observed in 28-day composites containing 0% marble–20% iron wastes. Furthermore, capillary water absorption tended to decrease with the substitution of 10% marble powder.

  AtıfScopus3·WoS2

  İncele
• MakaleAçık Erişim2022Scopus SJRQ1/r/munzur/2594
  Control measure prioritization in Fine − Kinney-based risk assessment: a Bayesian BWM-Fuzzy VIKOR combined approach in an oil station

  Gul, Muhammet; Yucesan, Melih; Ak, Muhammet Fatih

  The Fine − Kinney is a risk assessment method widely used in many industries due to its ease of use and quantitative risk evaluation. As in other methods, it is a method that recommends taking a series of control measures for operational safety. However, it is not always possible to implement control measures based on the determined priorities of the risks. It is considered that determining the priorities of these measures depends on many criteria such as applicability, functionality, performance, and integrity. Therefore, this study has studied the prioritization of control measures in Fine − Kinney-based risk assessment. The criteria affecting the prioritization of control measures are hierarchically structured, and the importance weights of the criteria are determined by the Bayesian Best–Worst Method (BBWM). The priorities of control measures were determined with the fuzzy VlseKriterijumska Optimizacija I Kompromisno Resenje (FVIKOR) method. The proposed model has been applied to the risk assessment process in a petrol station’s liquid fuel tank area. According to the results obtained with BBWM, the most important criterion affecting the prioritization of control measures is the applicability criterion. It has an importance weight of about 42%. It is followed by performance with 31%, functionality with 18%, and integrity with 10%, respectively. FVIKOR results show that the “Periodic control of the ventilation device” measure is the top priority for Fine − Kinney risk assessment. “The absence of any ducts or sewer pits that may cause gas accumulation in the tank area and near the dispenser; Yellow line marking of entry and exit and vehicle roads; Placing of speed limit warning signs” has been determined as a secondary priority. On conclusion, this proposed model is expected to bring a new perspective to the work of occupational health and safety analysts, since the priority suggested by Fine − Kinney risk analysis methods is not always in the same order as the one in the stage of taking action, and the source, budget, and cost/benefit ratio of the measure affect this situation in practice.

  AtıfScopus51·WoS42·OpenAlex54

  İncele
• MakaleAçık Erişim2022Scopus SJRQ1/r/munzur/2441
  Aroclor 1254 impairs sperm quality, fertilization ability, and embryo development of rainbow trout (Oncorhynchus mykiss)

  Kocabaş, Mehmet; Kocabaş, Filiz Kutluyer; Aksu, Önder; Benzer, Fulya; Erişir, Mine; Sahilli, Yeliz Çakir

  The polychlorinated biphenyls (PCBs) in aquatic environment adversely affect non-target organisms, including fish. Especially, the male reproduction and next generation can be damaged through high exposure to these pollutants. Hence, the sperm cells were exposed to sublethal concentrations of Aroclor 1254 (0, 1, 5, 10, or 25 mg/l) for 4 h. The sperm quality parameters were analyzed by SCA (Sperm Class Analyzer). The fertility, eyeing, and hatching rates were determined as gamete markers. Lipid peroxidation (malondialdehyde-MDA), glutathione (GSH), and antioxidant enzymes [superoxide dismutase (SOD), glutathione peroxidase (GPx), and catalase (CAT)] were measured for determination of oxidative stress. Our results showed that Aroclor 1254 negatively affected the motility rate and duration, fertilization rate, embryogenesis, and hatching and also triggered antioxidant defense mechanisms at the highest concentration (25 mg L−1). Furthermore, linear speed (VSL), linearity index (LIN), and amplitude lateral head (ALH) were significantly changed after exposure to 25 mg L−1, and the lowest concentrations (1 and 10 mg L−1) did not significantly affect the motility and fertilizing capacity. The embryogenesis and hatching were significantly affected by sperm exposure to 1, 10, and 25 mg L−1 of Aroclor 1254. Consequently, Aroclor 1254 causes potential hazards in male germ cells, and the exposure of sperm cells to pollutants can adversely affect next generation of wild populations.

  • 
  AtıfScopus6·WoS5·OpenAlex4

  İncele