Sürdürülebilir Kalkınma Amaçları

• 2
• 1
• 1

• MakaleAçık Erişim2026Scopus SJRQ2/r/munzur/896
  Electrochemical analysis of tetracycline in drug formulations with glutardialdehyde-Fe2O3 modified glassy carbon electrode

  Koçak, Berna; İpek, Yeliz

  In this study, a glutardialdehyde-Fe2O3 modified glassy carbon electrode (GA2–Fe2O3/GCE) was used as a sensor for the electrochemical analysis of tetracycline (TC) in drug formulations. The electrochemical behavior of TC on GA2-Fe2O3/GCE was investigated using cyclic voltammetry (CV), while the quantitative determination was performed via differential pulse voltammetry (DPV). After optimizing the experimental conditions, the linear working range, limit of (LOD) detection, and limit of quantification (LOQ) of the GA2-Fe2O3/GCE electrode developed for the electrochemical analysis of TC were found to be 1.0 × 10−6–2.0 × 10−5 M and 2.0 × 10−5–9.9 × 10−6 M; 4.78 × 10−7 M; 1.59 × 10−6 M, respectively. In the sensor application study conducted on a Tetra® Gensenta tablet to demonstrate the applicability of the developed method, the linear working range, LOD, and LOQ values of the sensor were found to be 1.0 × 10−6–14.8 × 10−5 M; 5.72 × 10−7 M and 1.74 × 10−6 M, respectively. The applicability of the method was demonstrated through tablet recovery studies, and the tablet recovery ratio was determined to be 100.94%.

  • 
  İncele
• MakaleYalnız künye2024Scopus SJRQ2/r/munzur/2205
  Process optimization and modeling of Pb(II) ions adsorption on a new and reusable biocomposite material using experimental design approach

  Ince, Muharrem; Kaplan Ince, Olcay; Alp Kavlo, Hevidar

  This research paper aimed to establish the optimal conditions for lead (Pb(II)) ions from industrial wastewater (IW) using response surface methodology and central composite design (CCD) approach. A fixed-bed column study was designed by using a novel and reusable biocomposite material, Amanita vaginata (A. vaginata) immobilized on Amberlite XAD-4 resin (A&XAD-4@AV), to find out biosorption behavior of Pb(II) ions. Various experimental variables such as optimum pH value, biocomposite material amount, flow rate, and Pb(II) ions initial concentration were investigated, which significantly affected the Pb(II) ions removal efficiency. The maximum Pb(II) removal efficiency of A&XAD-4@AV biocomposite material was determined as 11.2 mg g−1 under optimum conditions. The reusability of A&XAD-4@AV biocomposite material was found to be suitable. For checking model adequacy, a regression model was derived using CCD to predict the responses and analysis of variance (ANOVA) and lack of fit test was performed. It was observed that the quadratic model, which was controlled and proposed, originated from experimental design data. The ANOVA showed a high coefficient of determination (R2 = 0.9896, R2Adj = 0.9800, R2Pred = 0.9633). Finally, developed and optimized method was applied effectively to wastewater for determining Pb(II) ions levels. The current study indicated that the prepared A&XAD-4@AV is an efficient material to remove of Pb(II) ions from IW.

  • 
  • 
  AtıfScopus1·WoS1·OpenAlex1

  İncele
• MakaleYalnız künye2023Scopus SJRQ2/r/munzur/1975
  Novel electrochemical sensor of nebivolol drug used for treatment of hypertension and chronic heart failure

  İpek, Yeliz; Koçak, Berna

  Nebivolol is a beta-blocker used to treat high blood pressure and heart failure. Nebivolol is a cardiovascular drug in the group of selective beta-blockers (with selective action on the cardiovascular system). It prevents the increase in heart rate and controls the pumping power of the heart. It also has a dilating effect on blood vessels and helps to lower blood pressure with this effect. The ability to analyze nebivolol quickly, simply, economically and reliably is of high importance in two cases. The first is to adjust the drug dosage to be used by the patients, and the second is to provide fast intervention in the drug production process as a result of fast and accurate quality control in drug production and to provide quality control of produced tablets. Since, the boric acid has a good catalytic activity and enhances the peak current intensity, a boric acid‒glutardialdehyde-modified glassy carbon electrode was designed for investigation of electrochemical behavior and quantitative determination of nebivolol (NBV) in this study. Electrochemical reaction peak and the peak current intensity changes with changing NBV concentration provide detection of NBV. The role of glutardialdehyde was to immobilize the boric acid on the electrode surface with its crosslinking ability. The designed electrode was achieved by dropping boric acid‒glutardialdehyde mixture on glassy carbon electrode and drying it at room conditions. By using boric acid‒glutardialdehyde-modified glassy carbon electrode (BA‒GA2/GCE), quantitative analysis of the active drug ingredient (NBV), which is widely used in the treatment of hypertension and chronic heart failure, was carried out sensitively, selectively and at low detection limits with low cost. This electrode exhibited good repeatability and stability for detection of the oxidation peak of NBV. In addition, the working ranges and detection limits of NBV were determined in the optimum experimental conditions. SWV technique was used and according to the results obtained, LOD values for NBV in BR buffer (pH 9) and in urine samples were 1.0 × 10−7 mol L−1 and 4.12 × 10−7 mol L−1, respectively. The feasibility of the developed novel sensor was demonstrated by performing recovery studies with tablet and urine samples containing NBV. The recovery results were 93.10% and 58.16% for urine and tablet samples, respectively. Graphical abstract: [Figure not available: see fulltext.]

  • 
  AtıfScopus5·WoS5·OpenAlex5

  İncele
• MakaleYalnız künye2019Scopus SJRQ2/r/munzur/3443
  A comprehensive study about Hibiscus sabdariffa leaves: antioxidant activity, polyphenol profile and macro- and micro-element content

  Karaaslan, Nagihan M.

  Hibiscus sabdariffa leaves are generally consumed by people in cold drinks and herbal tea. The purpose of this study is to examine in terms of antioxidant activity, polyphenol profile and macro- and micro-element content of H. sabdariffa leaves. Firstly, antioxidant activity studies were carried out by applying antioxidant activity assays to different extracts of the plant leaves. It has been observed that the antioxidant activity results vary depending on the extraction solvent and that the result obtained for one extract in some tests could not be obtained for the same extract in the other tests when solvents are changed. Secondly, the polyphenol profile of this plant was identified with a high-performance liquid chromatography–diode array detector (HPLC–DAD). For this purpose, thirteen polyphenols were examined in leaves of this plant, but only caffeic acid, chlorogenic acid, ellagic acid, p-coumaric acid and quercetin were detected among the studied polyphenols. Finally, macro-element including calcium (Ca), potassium (K), magnesium (Mg), sodium (Na) and micro-element including copper (Cu), iron (Fe), zinc (Zn) analysis was carried out using flame atomic absorption spectrometry (FAAS).

  AtıfScopus9·WoS8·OpenAlex10

  İncele
• MakaleYalnız künye2013Scopus SJRQ2/r/munzur/4023
  Micelle nano-reactors as mediators of water-insoluble ligand complexation with Cu(II) ions in aqueous medium

  Adigüzel, Ragip; Tascioglu, Senay

  Complexation reactions between water-soluble and -insoluble reactants were shown to occur in aqueous media in the presence of normal or reverse surfactant micelles, in significantly higher yields at lower temperatures compared to those achieved in neat organic solvents. The highest yield enhancement in the complexation of novel water-insoluble bis(2-amino-1,3,4-thiadiazolyl)methane and 1,4-bis(2-amino-1,3,4-thiadiazolyl)benzene ligands with Cu(II) ions was achieved in the sodium bis(2-ethylhexyl)sulfosuccinate (AOT)-heptane-water reverse micellar system at the hydration ratio of 15. The results revealed that AOT normal micelles cause a change in the reaction mechanism together with the enhancement of the complex formation. The observed micellar effects were rationalized on basis of the properties of bulk solvents, surfactants and ligands, considering the solvation and hydration ratios of reverse micelles. The results have proved the dependence of complex yield on the amount and accordingly also on the properties of water in the micellar core, indicating that the yield can be maximized by the optimization of the hydration ratio.

  AtıfWoS4·OpenAlex5

  İncele