Sürdürülebilir Kalkınma Amaçları
Yayınlar
- MakaleAçık Erişim2026Scopus SJRQ1Failure of a Code-Compliant Reinforced Concrete Building: Damage Patterns and Nonlinear Seismic Response
Onat, Onur; Karaşin, İbrahim Baran; Yön, Burak; Varolgüneş, Sadık; Öncü, Mehmet Emin; Uslu, Ali
This study investigates the seismic performance limitations of a newly constructed reinforced concrete building that collapsed during the 6 February 2023 Kahramanmaraş–Elbistan earthquake despite formal compliance with current seismic design requirements. Beyond the specific earthquake event, the study addresses a broader scientific problem: the limited understanding of the relationship between observed damage mechanisms and nonlinear dynamic response in mid-rise reinforced concrete buildings. The first part classifies recurring structural and non-structural damage patterns identified in newly constructed RC residences. The second part presents a nonlinear fiber-based static and dynamic analysis of a collapsed mid-rise building. Nonlinear dynamic analyses were conducted using ground motion records scaled to match the site-specific elastic design spectrum defined by TBDY 2018, corresponding to predefined seismic performance levels rather than an incremental dynamic analysis framework. The results indicate that an extremely low shear wall–to–floor area ratio (0.0357%) combined with asymmetric vertical element distribution significantly amplified torsional response and local shear demands. Nonlinear dynamic analyses showed that critical shear walls exceeded Collapse Prevention limits under DD2-level excitation, while system-level shear contribution limits remained within code-defined thresholds. Dynamic base shear demand corresponded to approximately 30% of the maximum nonlinear capacity obtained from pushover analysis, indicating that localized member failure rather than global strength deficiency governed the collapse mechanism. The analytically identified critical members were consistent with the observed collapse configuration, particularly at the soft ground story. The findings demonstrate that prescriptive code compliance alone may not ensure satisfactory seismic performance when structural irregularities, torsional amplification, and detailing deficiencies coexist. The results are consistent with damage patterns reported in other recent destructive earthquakes and contribute to improving the understanding of collapse mechanisms in code-compliant RC buildings.
AtıfScopus4OpenAlex7
İncele - MakaleAçık Erişim2022Scopus SJRQ1Field reconnaissance and structural assessment of the October 30, 2020, Samos, Aegean Sea earthquake: an example of severe damage due to the basin effect
Onat, Onur; Yön, Burak; Öncü, Mehmet Emin; Varolgüneş, Sadık; Karaşin, Abdulhalim; Cemalgil, Selim
An earthquake with a magnitude ranging from Mw = 6.9 (KOERI) to Mw = 7.0 (USGS) struck Samos Island in the Aegean Sea on October 30, 2020, with an epicentre 70 kms from the İzmir city centre in Turkey. The earthquake took place at 14:51 local time (11:51 UTC). The peak ground acceleration (PGA) of this earthquake was recorded to be 0.179 g at the epicentre of the earthquake. This earthquake occurred at a depth of 17.26 km (AFAD (2020) İzmir Earthquake Report, (In Turkish)) and lasted 16 s. The main shock from the earthquake triggered a tsunami that hit the building stocks built near the coast. During the gradual deregulation of COVID-19 pandemic regulations, various events caused considerable damage to the building stock, particularly in the Izmir Seferihisar and Bayraklı regions and resulted in a massive disruption of daily habits. The main shock caused 117 deaths in both Turkey and Greece, and 1632 people were also injured in Turkey. Moreover, several injuries occurred in Greece. A total of 103 buildings collapsed, 700 were severely damaged, 814 buildings were moderately damaged, and 7889 were slightly damaged. The basic aim of this paper is to briefly present the past and present seismotectonic characteristics of the region, present building stock, and former structural conditions before the earthquake, assess structural performance and classify distinguished earthquake-induced failures and damage due to the basin effect.
AtıfScopus30WoS28OpenAlex29
İncele