Sürdürülebilir Kalkınma Amaçları
Yazarlar
Yayınlar
- MakaleAçık Erişim2024Role of Gate Type in the Air-Demand Ratio in Closed Conduits
Aydin, A. B.; Baylar, A.; Ozkan, F.; Tuna, M. C.; Ozturk, Mualla
Sluice and radial gates are common devices used to control flow in closed conduits. In high-head gated conduits, the high-velocity flow exiting the gate drags and entrains a lot of air. If the air demand of the flow is not met, the pressure drop downstream of the gate will cause structural damage or cavitation. Typically, an air vent is installed immediately downstream of the gate to supply sufficient air to the flow. In this study, the effect of the conduit gate type on the air-demand ratio was investigated. The results showed that the gate type had a very significant effect on the air-demand ratio. Significantly higher air-demand ratios were observed in the conduit with a sluice gate compared to the conduit with a radial gate. The results obtained will be useful in future modeling and design processes.
AtıfWoS1OpenAlex1
İncele - MakaleYalnız künye2020Scopus SJRQ3Application of Local Hard Fillet Weld to Repair Damage Caused by Cavitation in Hydroelectric Power Plant
Kahraman, Gökhan; Taşgin, Yahya
Hydroelectric power plants come into prominence worldwide day by day due to their low operating and maintenance costs, environment friendly structure and their use as renewable energy sources. In order to obtain maximum energy from such an important energy source, it is necessary to reduce downtime due to failures. One of the most important failures of hydroelectric power plants is the damage caused to the turbine wheel by cavitation. In this study, a sample with the same material as the turbine wheels of the hydroelectric power plants is provided. The effects of the hard fillet weld on the turbine wheel, which we have applied locally to this material, have been investigated both metallographically and physically. As a result of the research, it is observed that the main material and hard fillet weld are mostly compatible. The damages of the turbine wheel of the hydroelectric power plant have been repaired by applying the same method to the turbine wheel damaged by the cavitation. After 10,000 h of operation, the turbine wheel is inspected again. As a result, it has been determined that the hard fillet weld applied to the turbine wheel surface is resistant to the harmful effects of cavitation.
AtıfScopus2WoS2OpenAlex2
İncele - MakaleAçık Erişim2019Scopus SJRQ1Identification of optimum working conditions in hydroelectric power plants for cavitation
Kahraman, Gökhan; Yücel, Halit Lütfi; Taşgin, Yahya
Turbine faults in hydroelectric power plants not only reduce the operation time of the plant, but also cause a serious loss of income. One of the most important turbine faults is the turbine wheel wear caused by the cavitation and accordingly the other machine equipment faults which cause excessive vibration. In this study, cavitation intensity that the turbines have been exposed in operating conditions has been investigated. As a result of the calculations, optimum working conditions of the units have been determined with graphs obtained in various operating conditions. The obtained data can be easily applied to all hydroelectric power plants exposed to cavitation, and safe operating conditions can be determined.
AtıfScopus11WoS10OpenAlex13İncele