Yazarlar
Yayınlar
- MakaleYalnız künye2024Scopus SJRQ1The effect of high entropy oxide on radiation shielding parameters of erbium oxide doped glasses
Kanca, M. Sait; Taşgın, Yahya; Yılmaz, Demet; Pathman, Abdul Fatah; Güler, Ömer
High-entropy materials are one of the most studied topics in recent years due to the extraordinary properties they exhibit. High entropy oxide (HEO) is a group of materials that have been studied for different applications. However, the effects of HEOs on the radiation properties of glasses are not well known. In this study, the structural, radiation and neutron shielding properties of SiO2 glass systems doped erbium oxide reinforced with refractory high entropy oxide (RHEO) with the formula TiMoNbTaWZrO11 were investigated. RHEAs used in the study were produced and characterized in our laboratory. Then, they were added to the glass samples at different rates together with Erbium oxide. As a result of SEM-EDS and XRD analyses, it was determined that the additives were distributed very homogeneously on the glass. The composition of glass systems is [95SiO2+(5-x)Er2O3+x TiMoNbTaWZrO11], where (x = 0, 0.5, 1 and 2 %, mol). The linear and mass attenuation coefficients (LAC and MAC), mean free path (MFP), half-value layer (HVL) and effective atomic numbers (Zeff) and effective electron density (Nel) of the glass structures were experimentally measured at the energy region of 53.16–661.62 keV. Also, the equivalent dose rates due to fast neutrons absorption were measured by using an 241Am–Be fast neutron source. Exposure buildup factor (EBF) and fast neutron removal cross section (ΣR) were theoretically determined. The proton and alpha shielding parameters of glasses were calculated. It is observed that glasses containing higher amounts of refractory high entropy oxide, within the SiO2–Er2O3 composition, demonstrated enhanced capabilities for shielding against radiation and neutrons.
AtıfScopus15WoS15OpenAlex17
İncele - MakaleYalnız künye2024Scopus SJRQ1Effects of Er2O3 contribution on microstructure and mechanical properties of high entropy and dual phase alloys
Taşgın, Yahya; Malkoç, Aziz; Kanca, M. Sait
The study aimed to look at the differences between a high entropy alloy and a dual phase high entropy alloy with high iron and Mn content. It also wanted to find out what happened when a small amount of the rare earth element erbium oxide (Er2O3) was added to these alloys, especially on the mechanical and microstructure of the alloy. The first step in this study was to get 99 % pure metal powders, which were then made by dividing the powders into 30 g of equal weight. The powders were mixed evenly and then pressed into 10-g blocks under 6 tons of pressure. They were then set up to be melted in an arc. Four of the eight samples that were melted in an arc under vacuum were treated with heat. The four different compositions were then turned into small metallographic samples for SEM, EDX, Mapping, XRD, and microhardness tests. The study's imaging and analysis processes were also carried out. After that, SEM images were taken at various magnifications (100X, 500X, 1000X, 2500X, and 5000X), and EDS and XRD analyses were done on different structures found in these images. These analyses were based on literature research about the clarity of the metallographic images in the alloy, which showed the study's metallographic differences. The samples were put through microhardness and wear tests to see which one was stronger and less worn. The dual phase high entropy alloy (A2) was stronger and less worn than the high entropy alloy (A1). Er2O3 had little effect on the alloys' mechanical properties or microstructure. The heat treatment that was done to the samples helped the metallographic structure. In terms of physics, it didn't change the hardness much, but it did make the material wear less quickly.
AtıfScopus1WoS1OpenAlex1İncele - MakaleYalnız künye2019Scopus SJRQ4CHARACTERIZATION OF ERBIUM OXIDE NANOPARTICLES
Ates, Mehmet; Kar, Bulent; Bogatu, Coneliu
Considering the advantages of nanoscale materials such as being lighter, more robust, programmable materials, less material usage, less energy requirement during production phase, and no longer producing materials, it is important to produce nanomaterials and determine their properties. Therefore, the characterization of nanomaterials has become one of the pillars of material science. An important aspect of nanoscale material science is the method of characterization of materials that we use or study to learn more about them. In recent years, great importance has been given to rare earth materials with nanostructures. One of the rare earth elements is Erbium and it is one of the newly discovered materials that is used in high technology. Erbium oxide (Er2O3) nanoparticles (NPs) are used in electronic devices. It is used in capacitors, metal oxide semiconductor transistors, and as dopants for optical fiber and laser materials. In this study, Erbium based Er2O3 NPs were characterized. The characterization of Er2O3 was realized using X-ray diffraction (XRD), scanning electron microscopy (SEM), the energy dispersive X-ray (EDX), and Fourier transform infrared spectroscopy (FT-IR). The number of specific peaks and their position fit very well with those from standard XRD spectrum and revealed pure Er2O3 nano oxide. SEM analysis of these particles showed their spherical shapes that are in great extent uniform distributed with nano sizes ranged between 40-60 nm.