Thickness- and Binder-Chemistry-Dependent Structural, Mechanical, and Tribological Performance of HVOF-Sprayed WC-Co and WC-Co-Cr Coatings on High-Speed Steel

High-velocity oxy-fuel (HVOF) spraying was used to deposit WC-Co and WC-Co-Cr coatings on high-speed steel in order to determine how binder chemistry and coating thickness jointly control load support, friction, and dry sliding wear resistance. Nominal 50 and 100 µm coatings were compared within the same substrate framework by XRD, FT-IR, SEM/EDX, cross-sectional image analysis, Vickers hardness testing, dry sliding wear testing, and post-wear SEM/EDX. The coatings retained WC as the dominant crystalline phase, while weak overlapping features were associated with binder-rich regions and limited decarburization products. Cross-sectional observations confirmed continuous coating build-up close to the nominal thicknesses and low apparent dark-feature/porosity fractions. All WC-based coatings increased the effective hardness and reduced mass loss relative to uncoated HSS. Among the tested conditions, WC-Co-Cr-100 provided the highest effective hardness and the lowest mass loss after 1000 m sliding, whereas WC-Co-100 produced the lowest mean coefficient of friction. The results show that low friction and high wear resistance are not governed by identical mechanisms: WC-Co favours interfacial shear reduction, while the thicker Cr-containing coating provides superior resistance to material removal through improved carbide retention, binder stability, and coating-scale load support.