Sürdürülebilir Kalkınma Amaçları
Yayınlar
- DüzeltmeAçık Erişim2026Scopus SJRQ1Correction: 2D MHD Mixed Convection in a Zigzag Trapezoidal Thermal Energy Storage System Using NEPCM (Nanomaterials, (2022), 12, 19, (3270), 10.3390/nano12193270)
Abderrahmane, Aissa; Younis, Obai; Al-Khaleel, Mohammad; Laidoudi, Houssem; Akkurt, Nevzat; Guedri, Kamel; Marzouki, Riadh
There were errors in the original publication [1]. In Abstract and Introduction, any reference to “heat transfer (HT) irreversibility,” “fluid friction (FF) irreversibility,” or “Bejan number” is erroneous and should be removed. Any reference to “wave number” should be corrected to “zigzag number,” which is the relevant parameter in the study. The corrected Abstract and the corrected sentence in the last paragraph of the Introduction appear below, respectively. In a magnetic field, two-dimensional (2D) mixed convection is investigated within a zigzagged trapezoidal chamber. The lower side of the trapezoidal chamber is irregular, in particular, a zigzagged wall with different zigzag numbers N. The fluid particles move in the room due to the motion of the upper wall, while the porosity-enthalpy approach represents the melting process. The thermal parameters of the fluid are enhanced by what is called a nano-encapsulated phase change material (NEPCM) consisting of polyurethane as the shell and a nonadecane as the core, while water is used as the base fluid. In order to treat the governing equations, the well-known Galerkin finite element method (GFEM) is applied. In addition, the heat transfer (HT) and the dynamic behavior of flow are treated in terms of average Nusselt number and contours of streamlines. The main results show that the melt band curve of heat capacity behaves almost parabolically at smaller values of Reynolds number (Re) and larger values of Hartmann number (Ha). Moreover, minimizing the zigzag number is better in order to obtain a higher heat transfer rate. In addition, a comparative study of the heat transfer and the dynamic behavior of flow in terms of average Nusselt number and contours of streamlines has been presented. In Section 2.1. Mathematical Modeling and Equations, Paragraph 3 and Paragraph 4, the term of porosity must be added to the momentum equations. The Equations (2), (3), (8) and (9) should be updated to the following: (Formula presented.) (Formula presented.) (Formula presented.) (Formula presented.) In Section 2.1. Mathematical Modeling and Equations, Paragraph 4, Paragraph 5 and Paragraph 9, there is no cylinder inside the cavity, and any reference to a “cylinder” or “diameter D” is incorrect and should be disregarded. The pressure in Equation (6), the Reynolds Number in Equation (11) and the definition for the average Nusselt number at the zigzag wall in Equation (16) should be updated to the following: (Formula presented.) (Formula presented.) (Formula presented.) The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
- DüzeltmeYalnız künye2024Scopus SJRQ1Retraction notice to “Cooling of non-sloped, positively sloped, and negatively sloped arrangements of Li-ion batteries with a phase change material connected to a solar system” [J. Energy Storage 52 Part B (2022) 104808] (Journal of Energy Storage (2022) 52(PB), (S2352152X22008179), (10.1016/j.est.2022.104808))
Akkurt, Nevzat; Aghakhani, S.; Mahmoud, Mustafa Z.; Abdelrahman, Anas
This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/policies/article-withdrawal). Please note that an Expression of Concern has previously been published to alert readers to an ongoing investigation into this paper. This retraction supersedes the Expression of Concern. This article has been retracted at the request of the editor. In investigating concerns brought up regarding the article, the editor reached out to the authors for an explanation. Furthermore, the editor discovered suspicious changes in authorship between the original submission and the revised version of this paper. In summary, the author names Nevzat Akkurt (new first author), Mustafa Z. Mahmoud and Anas Abdelrahman were added to the revised paper without explanation and without the exceptional approval by the editor, which is contrary to the journal policy on changes to authorship. The authors failed to provide a satisfactory explanation to the above points. The editor therefore feels that the findings of the manuscript cannot be relied upon and that the article needs to be retracted.
- MakaleYalnız künye2024Scopus SJRQ3Simultaneous features of ternary hybrid nanoparticles on thermal radiative flow configured by Darcy–Forchheimer porous surface
Nasir, Saleem; Sirisubtawee, Sekson; Akkurt, Nevzat; Ali, Ishtiaq; Gul, Taza; Juntharee, Pongpol
Due to its remarkable thermodynamic development in various engineering sciences, the dispersion of nanostructures in classical base liquids is receiving greater attention from researchers and scientists. In light of the aforementioned inspirations, the suggested research is associated with using a water-based ternary-hybrid nanofluid that contains three unique nanostructures, silicon dioxide, titanium dioxide and aluminum oxide to optimize the heating process in science and engineering. In this situation, the influence of a chemically reactive magneto-hydrodynamics (MHD) Darcy–Forchheimer ternary hybrid composites transport involving nonlinear radiation across an exponentially permeable stretched surface is highlighted with the model's physical initial and boundary constraints. The simulation of the heat expression also includes the impacts of nonlinear thermal radiations, energy supply, energy dissipation and magnetic force. Furthermore, the interpretation of Buongiorno's theory involves spontaneous and thermophoresis diffusions. Entropy analysis is explained using the second law of thermodynamics. We converted the model framework for fluid movement, energy and mass transfer (together with ternary hybrid nanofluid characteristics) into self-similar nondimensional differential equations, that were then further analytically evaluated by using the homotopy asymptotic method (HAM) technique via Mathematica software. The acquired results are illustrated numerically and graphically to study the behavior of fluid flow, heat, concentration distribution, drag force, rate of heat and mass transfer for various emergent components to gain scientific comprehension. With the growing values of magnetic, porosity and Forchheimer number, the nature of the velocity profile goes down.
AtıfScopus10OpenAlex11
İncele - DüzeltmeYalnız künye2024Scopus SJRQ1Retraction notice to “The influence of battery distance on a hybrid air-cooled cylindrical lithium-ion battery phase change material thermal management system for storing solar energy” [Journal of Energy Storage 52, Part B (2022) 104873] (Journal of Energy Storage (2022) 52(PB), (S2352152X22008805), (10.1016/j.est.2022.104873))
Akkurt, Nevzat; Aghakhani, S.; Mahmoud, Mustafa Z.; Tag El Din, ElSayed M.
This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/policies/article-withdrawal). Please note that an Expression of Concern has previously been published to alert readers to an ongoing investigation into this paper. This retraction supersedes the Expression of Concern. This article has been retracted at the request of the editor. In investigating concerns brought up regarding the authenticity of the article, the editor reached out to the authors for an explanation. Furthermore, the editor discovered suspicious changes in authorship between the original submission and the revised version of this paper. In summary, the author names Nevzat Akkurt, Mustafa Z. Mahmoud and ElSayed M. Tag El Din were added to the revised paper without explanation and without exceptional approval by the editor, which is contrary to the journal policy on changes to authorship. The authors failed to provide a satisfactory explanation to the above points. The editor therefore feels that the findings of the manuscript cannot be relied upon and that the article needs to be retracted.
- MakaleYalnız künye2024Scopus SJRQ2Urban heat island patterns in garden cities: Putrajaya as a case study
Harun, Zambri; Akkurt, Nevzat; Khor, Yu King; Abbas, Ashraf A; Lotfy, Eslam Reda
The garden-city model, characterised by sprawling urban expansion and extensive open spaces, features green and water surfaces alongside substantial road networks, large parking lots and unshaded lands. This diverse landscape contributes to uneven air temperature distribution within the city. Our study investigated urban heat island (UHI) patterns in various urban environments within Putrajaya, focusing on rural, business, residential and near-water areas. Atmospheric data were collected over a year. Putrajaya exhibits two distinct UHI patterns: cool-day-hot-night in residential zones and hot-noon-temperate-elsewhere in impermeable areas. Business areas display alternating patterns based on seasonal climatic conditions and anthropogenic factors. The efficacy of artificial water bodies as a UHI countermeasure in garden cities depends on the size of the water body and the nature of the surrounding land cover. Shaded and green areas exhibit UHI intensities limited to 3°C, while impermeable areas, regardless of proximity to water surfaces, experience UHI up to 6°C. Overall, the garden-city model tends to restrict UHI variations within −1 to 3°C compared to −2 to 4°C in nearby Kuala Lumpur.
AtıfScopus9OpenAlex7İncele - BildiriYalnız künye2024Assessing Environmental Pollution and Noise Levels at End-of-Life Vehicle Recycling Centers: A Comparative Study
Harun, Zambri; Akkurt, Nevzat; Hashim, Hashimah; Molla, Altaf Hossain; Cahyadi, Mokhamad Nur; Zuhal, Lavi R.
This study investigates the environmental impact of end-of-life vehicle (EL V) recycling operations by assessing pollution parameters and noise levels at formal and informal recycling centers compared to a green zone reference area. U sing an integrated monitoring system. This research measured concentrations of particulate matter (PM2.5, PMlO), nitrogen dioxide (N02), carbon dioxide (C02), ozone (03), and noise levels at selected sites in Selangor, Malaysia. Results reveal elevated pollutant concentrations and noise levels at both formal and informal EL V recycling centers relative to the green zone reference area. Diurnal variations in pollutant levels highlight the influence of operational activities and atmospheric conditions. The findings underscore the need for stringent regulatory measures and pollution control strategies to mitigate environmental and health risks associated with EL V recycling activities and promote sustainable practices in the recycling industry.
AtıfScopus2OpenAlex2İncele - MakaleAçık Erişim2023Scopus SJRQ1Analysis of the forced convection via the turbulence transport of the hybrid mixture in three-dimensional L-shaped channel
Akkurt, Nevzat; Shedd, Tim; Memon, Abid Ali; Usman; Ali, Mohamed R.; Bouye, Mohamed
After introducing the advantage of nanofluids for optimizing heat transfer, many research articles have been written considering the different types of domains. In our article, we will observe the turbulent transport of a hybrid mixture through the three-dimensional L-shaped channel to analyze the characteristic of heat generation via forced convection. The hybrid nanofluid is composed of aluminum oxide copper (Cu) and aluminum oxide (Al2O3), which will be present in the base fluid by the volume fraction of 5%, 15%, 25%, and 35% in the base fluid (water). To analyze the forced convection, the Reynolds number (Re) will be kept at 10,000 to 40,000. The simulation will be developed using the three-dimensional κ-ϵ turbulence model and energy equations via COMSOL Multiphysics 5.6. The numerical outcomes will be verified using the literature's correlations for the average Nusselt number. It was found that the average Nusselt number at the mid of the channel is increased by increasing the volume fractions of both aluminum oxide and copper, but the rate of increase because of copper is greater than the rate of increase because of aluminum oxide. The study also suggests that to get more benefit from the transport of a hybrid mixture, keep the Reynolds number high. The temperature along the channel length is the function of mean thermal diffusivity, which is directly proportional to the volume fractions of the hybrid mixture.
AtıfScopus34OpenAlex35İncele - MakaleYalnız künye2023Scopus SJRQ3ENTROPY ANALYSIS OF HYBRID NANOFLUID FLOW OVER A ROTATING POROUS DISK: A MULTIVARIATE ANALYSIS
Prakash, J.; Tripathi, Dharmendra; Akkurt, Nevzat; Shedd, Tim
This article discusses the flow of a time-dependent biviscosity hybrid nanofluid boundary layer across a rotational permeable disk with effects of magnetic field and thermal radiation, and the subjective and quantitative transfer of heat flow. In the classic Von Karman issue, nanofluids comprising volume fractions ofAg-MgO/60% water and 40% ethylene glycol are considered instead of Newtonian regular fluids. The governing equations are transformed nonlinear ordinary differential equations using Von Karman transformations. The equation for the generation of entropy is calculated as a function of velocity and temperature gradient. This equation is made nondimensional by adding geometric and physical flow field-dependent parameters. The velocity profiles in the radial, tangential, and axial directions, as well as the axial pressure gradient, nanoparticle temperature distribution, local skin friction, Nusselt number, and Bejan number, are calculated by using MATLAB bvp4c. The multivariate analysis is implemented in the numerical results of the Nusselt number. A rotation parameter is generated by the spinning phenomena, which regulates the disk’s movement. Increasing the rotation of the disk causes fluid velocity to accelerate in both the radial and cross-radial directions, while contrasting phenomena can be noticed in the axial velocity of the flow. The temperature and wall shear stress of a nanofluid both rise with the disc’s Brinkman number and the volume fraction of nanoparticles. Increasing the thickness of the thermal boundary layer raises the axial pressure gradient. Entropy measured by the Bejan number Influences the magnetic field and the Biot number. Physical parameters presented in this article may be used to optimize the system’s performance. A magnetic rotating porous disk drives could be used in nuclear space propulsion engines and in heat transfer augmentation in thermal management and renewable energy sources.
AtıfScopus6WoS6OpenAlex6İncele - MakaleYalnız künye2023Scopus SJRQ1Analysis of the mechanical behavior and prediction of the plastic zone of a large-diameter buried gas pipeline under ground overload
Xu, Qian; Zhong, Liqiong; Shu, Mengjie; Zou, Zhenwei; Yang, Gang; Zheng, Qiang; Chen, Xingli; Akkurt, Nevzat; Zhang, Hui; Qiang, Yujie
Plastic failure of pipelines caused by ground overload is increasing. The one-dimensional model based on mechanical nodal parameters cannot predict the plastic failure characteristics of the three-dimensional structure of the pipeline. In order to predict the evolution of the plastic failure of the pipeline with the yield strength as the evaluation criterion, a multidimensional model is needed to consider the changes in the external loads and the changes in the mechanical properties of the pipeline along the circumferential and axial directions. In this study, a finite element calculation model for a large-diameter gas pipeline underground overload was established to investigate the law of stress change in the plastic zone. The nonlinear surface fitting method was used to establish the angle fitting model of the plastic zone and the depth fitting model of the plastic zone. The variation of the area of the plastic zone was described, and the reliability of the results was verified. In addition, the accuracy of the fitting model and the cost of the finite element calculation were evaluated. The results showed that the pipeline entered plasticity at a ground load of P = 25 MPa, and the plastic zone developed continuously in the axial and circumferential directions as the ground load increased. The angle and depth increased to 36° and 1.8 m, respectively, at P = 50 MPa. The average absolute errors for the plastic zone depth fitting model and the plastic zone angle fitting model were 6.42% and 6.64%, respectively, both of which can provide an accurate description of the plastic zone. The calculation results of the plastic zone angle fitting model could meet requirements of data processing and analysis. The plastic zone depth fitting model could be used to obtain solutions with higher accuracy, but it increases the cost of finite element simulation.
AtıfScopus6OpenAlex6İncele - MakaleYalnız künye2023Scopus SJRQ2Computational assesment of Carreau ternary hybrid nanofluid influenced by MHD flow for entropy generation
Ramzan, Muhammad; Ali, Farhan; Akkurt, Nevzat; Saeed, Anwar; Kumam, Poom; Galal, Ahmed M.
Tri-hybrid nano-particles in shear rate-dependent viscous fluid are essential for improving heat and mass transmission in many industries. The current study explores the two-dimensional flow of the Carreau-ternary hybrid nanoliquid with a magnetic field over the stretching surface. The heat transport mechanism is deliberated through the applications of thermal radiation and heat source/sink effects. The entropy minimization of the flow of Carreau ternary hybrid nanofluid has also been scrutinized. Further, the concepts of convective conditions are employed for the numerical solution of the existing model. In the present flow analysis, silver (Ag), Molybdenum disulfide (MoS2), and multi-wall carbon nanotube (MWCNT) nanoparticles are studied. Carboxymethyl cellulose (CMC-water) is used as a base liquid. The well-established numerical collocation finite difference scheme and three-stage Lobatto III as the built-in function of the bvp4c solver via MATLAB have been used to solve the system of equations in the form of concentration, energy, and momentum. Numerous features, such as flow speed, temperature, drag friction, and Nusselt number, are described in figures and tables. From the existing model, some key outcomes are that the rising values of the radiation parameter increased the heat transfer rates. Further, it is dissected that the greater importance of the magnetic field parameter declined the entropy generation and velocity of the liquid.
AtıfScopus88OpenAlex96İncele - MakaleAçık Erişim2023Scopus SJRQ1Radiation mechanism on dissipative ternary hybrid nanoliquid flow through rotating disk encountered by Hall currents: HAM solution
Shamshuddin, M.D.; Akkurt, Nevzat; Saeed, Anwar; Kumam, Poom
The energy transition to enhance heat transport during the flow of ternary hybrid nanofluid comprised of Copper (Cu), Iron oxide (Fe3O4), Silicon dioxide (SiO2) nanoparticles and Polymer as base liquid over a revolving disk surface has been reported. From the several existing techniques, adding nanoparticles to standard working fluids is an effective approach that might dramatically improve the rate of heat transfer. The Hall and radiation impacts are also considered. A mathematical model is developed by assuming the flow as incompressible and purely radial in a cylindrical coordinate system and appropriate similarity variables are introduced for problem simplification and dimensionless analysis. The solution of complex generated PDEs was calculated using semi analytical method known as Homotopy Analysis Method (HAM) after translating them into corresponding ODEs. It has been observed that the consequences of thermal radiation, dissipation term, unsteadiness and rotation parameters boost the energy transmission rate and enhances the heat transfer rate of tri hybrid nanofluids. However, Cu-Fe3O4 nanoparticles in the base fluid remarkably magnifies the energy transmission rate. The unitary ternary hybrid nanofluid (Cu, Fe3O4, SiO2) has higher velocity profiles as compared to unitary nano fluid (Cu) and hybrid nano-fluid (Cu-Fe3O4).
AtıfScopus133WoS121OpenAlex138İncele - MakaleAçık Erişim2023Scopus SJRQ1Numerical simulation for peristalsis of Quemada fluid: A dynamic mesh approach
Ali, Shahbaz; Nadeem, Sohail; Akkurt, Nevzat; Ali Ghazwani, Hassan; Eldin, Sayed M.
Introduction: Flow dynamics due to the peristaltic pumping has been the topic of great interest for the researchers. But numerical and analytical analyses for the peristaltic motion are limited where flow domain is deformed real-time. Research on peristalsis has a limitation where theoretical aspects of walls motion are considered, neglecting the real time deformation of the walls. Objectives: This paper aims to propose a more reliable and accurate numerical methodology for peristaltic motions to address the above-mentioned challenge. Stream traces, velocities, and pressure drops along the tube is to be visualized more accurately. Methods: In present study a finite volume based dynamic mesh motion method is adopted to analyze the peristaltic motion of a non-Newtonian Quemada fluid in an axisymmetric channel. The walls and interior domain of the channel is dynamically deformed for a sinusoidal wave traveling on boundary. Results: Simulation of unsteady flow behavior for time t=0s to 2s and amplitude ratio Φ=0.2,0.4,and0.6. predicts fluid trapping phenomenon. Rotation of fluid particles is more prominent for higher amplitude ratios. Pressure gradient increases with increasing amplitude ratios. Conclusion: A novel dynamic mesh method is proposed for peristaltic pumping. It provides more accurate and more physical results for stream traces; pressure drops and velocities along the tube. A limited case of the study validates the theoretical and analytical results already presented in literature; hence the method is reliable.
AtıfScopus10OpenAlex12
İncele - DüzeltmeAçık Erişim2023Scopus SJRQ1Corrigendum to “Modeling and numerical simulation of non-Newtonian arterial blood flow for mild to severe stenosis” [Alex. Eng. J. 72 (2023) 195–211, (S1110016823002594), (10.1016/j.aej.2023.03.088)]
Nadeem, Sohail; Ali, Shahbaz; Akkurt, Nevzat; Bechir Ben Hamida, Mohamed; Almutairi, Shahah; Ghazwani, Hassan Ali; Eldin, Sayed M.; Khan, Zareen A.; Al-Shafay, A.S.
The authors regards, In the original article, in Ref. [16], the citation was incorrectly stated as: H. Liu et al., 3D printing of artificial blood vessel: study on multi-parameter optimization design for vascular molding effect in alginate and gelatin, Micromachines (2017) 8. However, upon thorough review and verification, the authors have discovered that the correct citation should be as follows: V. Carvalho, N. Rodrigues, R. Ribeiro, P.F. Costa, R.A. Lima, S.F.C.F. Teixeira, 3D printed biomodels for flow visualization in stenotic vessels: An experimental and numerical study, Micromachines, vol. 11, no. 6, doi: 10.3390/mi11060549. The authors deeply apologize for this oversight and any confusion it may have caused to the readers and the scholarly community. It is crucial to ensure the accuracy and integrity of their citations, and they sincerely regret any inconvenience this may have caused.
- MakaleAçık Erişim2023Scopus SJRQ1Numerical analysis of heat transfer and fluid flow in microchannel heat sinks for thermal management
Singupuram, Raghav; Alam, Tabish; Ali, Masood Ashraf; Shaik, Saboor; Gupta, Naveen Kumar; Akkurt, Nevzat; Kumar, Mukesh; Eldin, Sayed M.; Dobrotă, Dan
Electronic components used in a variety of applications, such as electronic devices, computers, automobiles, medical equipment, telecommunications, etc., can be effectively cooled using microchannel heat sinks (MHS). In this paper, a novel design of an MHS is presented, which can manage the heat load (dissipate the excess heat) and maintain the temperature of the MHS in the safe range. The passage of the MHS was modified with circular extruding ribs on the side wall of the passage. This technique in MHS was inspired by the study of heat transfer enhancement in heat exchangers. The effects of the sector angle of the circular protruding ribs ranging from 45° to 80° were studied in laminar flow (Re = 100–900). It was found that the maximum Nusselt number in the range of 7.26–64.11 was observed at sector angles of circular protrusion ribs of 80°. Also, the values of thermohydraulic performance parameter (THPP) are greater than one, which shows that the application of the proposed design for thermal management of MHS is reasonable and effective.
AtıfScopus41OpenAlex43İncele - MakaleYalnız künye2023Scopus SJRQ1A data-driven evaluating method on the defrosting effect of the air source heat pump system in Beijing
Guo, Yanhua; Shao, Shuangquan; Geng, Xudong; Li, Hao; Wang, Zhichao; Akkurt, Nevzat
The current demand-based defrosting initiation strategies of air source heat pumps (ASHPs) faces difficulty in achieving a balance between cost and robustness. Therefore, an efficient and innovative demand-based defrosting initiation strategy is proposed in this paper, based on the learned the degradation of heating capacity (DHC) method using data-driven model. Firstly, the DHC method is developed using the initially installed sensors without additional sensors to identify the frosty state. Subsequently, the fully connected neural network (FNN) model is established for predicting frosty state using field measured data from the ASHP system. Finally, the effectiveness of the defrosting initiation strategy is further validated through practical testing. The results demonstrate that the DHC method provides a reliable database for training the FNN model, resulting in an impressive accuracy of 91.43% for predicting the frosty state in the testing set. By adopting the innovative demand-based defrosting initiation strategies, the defrosting frequency, heating loss, and power consumption are respectively decreased by 66.3%, 2.1%, and 6.0% with the SCOP enhanced by 8.6% during a heating season. The promising results highlight that the proposed strategy effectively reduces costs while ensuring the efficiency of demand-based control.
AtıfScopus23WoS22OpenAlex27İncele - MakaleYalnız künye2023Scopus SJRQ2Ternary hybrid nanofluids flow on a spinning disk with nonlinear thermal radiation
Gohar; Saeed, Anwar; Alyami, Maryam Ahmed; Akkurt, Nevzat; Khan, Tahir Saeed; Gul, Taza
Researchers are interested in the thermophysical properties of nanofluids because of the successful use of nanofluids in state-of-the-art technology and engineering. Hence, hybrid and tri-hybrid nanofluid is used to ensure the required thermal features. An incompressible ternary hybrid nanofluid (NF) flow comprised of (Al2O3) aluminum oxide, (CuO) copper oxide, and (TiO2) titanium dioxide nanoparticles across an impermeable infinite spinning disc are addressed in the present study. The magnetic field and second-degree thermal radiation were used in the proposed model. The main aim of this assessment is to raise the consciousness of energy exhaustion in the industrial and technical sectors. The numerous applicability of ternary nanoparticles (NPs) make the proposed model more plausible, such as, Al2O3 has society-enhancing and life-extending applications, CuO has unique electrical, optical, and magnetic properties, while TiO2 is excessively used in plastic and paper production. For this purpose, the sensations have been expressed in the form of differential equations and the consequences are obtained using the homotopy analysis method (HAM). The graphics and statistical outcomes of the analytical simulation of the proposed model are reported through Figures and Tables.
AtıfScopus14WoS14OpenAlex15İncele - Derleme MakaleYalnız künye2023Scopus SJRQ1A review of advances in mechanical behaviors of the underground energy transmission pipeline network under loads
Zheng, Qiang; Xu, Qian; Shu, Zekai; Yang, Di; Chen, Weiwang; Akkurt, Nevzat; Zhang, Hui; Lin, Lin; Zhang, Xinxin; Ding, Yulong
The safety of underground energy transmission pipeline network is threatened by traffic, earthquakes, explosions, and other stresses. To solve the problem of damage to the underground energy transmission pipeline networks by external loads, this study analyzed the mechanical properties of the Pipe-Soil Coupling System (PSCS) under external loads from a mechanical perspective. The pipeline constitutive model, the soil constitutive model, the internal effect of the PSCS, the influence of external stresses on the PSCS, and the dynamic response of the PSCS under various research methodologies were all studied. First, different mechanical features of the pipes and soil were employed to investigate the pipe and soil constitutive models. Second, based on the different force directions within the PSCS, the earth pressure and axial friction of the PSCS were investigated to clarify the interaction between the pipe and soil. For the purpose of to better understand the degradation of the underground pipeline state, the impacts of man-made and natural stresses on the PSCS failure were explored. Finally, the results of the investigation of the dynamic response of the PSCS were examined for their applicability using three research methods: theoretical analysis, numerical simulation, and experimental analysis. It is found that the existing constitutive models of pipeline and soil are lack of basis, which increases the difficulty of the selection of constitutive models in the process of research. In the analysis of load effect, earth pressure plays a dominant role in affecting the local stability of pipeline, but the calculation accuracy of soil pressure needs to be improved. Due to the lack of experimental guidance for complex damage phenomena under external loads, it is impossible to accurately determine the limit state parameters of pipelines under complex damage modes. It is critical to create and refine the theory underpinned by numerous experimental data in order to address the issue of pipeline dynamic response under multi-field coupling, including explosion and earthquake. This work is critical for analyzing existing research findings, identifying future research problems, and enhancing buried pipeline safety management.
AtıfScopus15WoS13OpenAlex14İncele - MakaleAçık Erişim2023Scopus SJRQ1Magneto-couple stress of tri-hybrid metallic oxide nanomaterials in porous media with nonlinear properties for thermal technology advancement
Salawu, S.O.; Obalalu, A.M.; Fatunmbi, E.O.; Disu, A.B.; Akkurt, Nevzat
The rising industrial demand for technological advancement in improving their working fluids and thermal augmentation has prompted studies on various non-Newtonian fluids and nanofluids. These play momentous role in many engineering devices and electronics development. Therefore, this study seeks to examine the thermal performance of ternary hybridized magneto-couple stress nanofluids in permeable media with nonlinear thermofluidic properties. The dispersion of suspended cobalt ferrite CoFe2O4, titanium dioxide TiO2 and magnesium oxide MgO nanoparticles occurs in H2O conventional solvent. With isothermal energy, the tri-hybrid nanofluid is controlled by stretchy velocity, magnetic field, gravity and Ohmic heating. An invariant transmutation of the partial derivative model is offered using similarity variables. The complete solutions to the model are obtained via Chebyshev technique coupled with integrated collocation method. From the graphically presented results, it is revealed that strong heat transfer is provided by ternary CoFe2O4+Ti02+MgO nanofluids compared to CoFe2O4+Ti02 and CoFe2O4 nanofluids. Also, the nanofluid concentration volume fraction enhanced thermal distribution and performance in the system.
AtıfScopus26WoS26OpenAlex27İncele - MakaleYalnız künye2023Scopus SJRQ1Energy, exergy and cost analysis of different hemispherical solar distillers: A comparative study
Hadi Attia, Mohammed El; Hussein, Ahmed Kadhim; Radhakrishnan, Ganesh; Vaithilingam, Sivakumar; Younis, Obai; Akkurt, Nevzat
The experimental study of the results of reflective aluminum foils, metal sheets, and phosphate granules on the productivity and efficiency of hemispherical solar stills was given throughout this work under the solar conditions of the city of El-Oued (Algeria). Solar stills were designed, manufactured, and tested in August 2020. A standard hemispherical solar still was made of wood and coated with black silicon. It was considered a traditional solar still. Although it was compared to traditional solar stills, it was improved by covering its side walls with reflective aluminum foil, zinc metal sheets, and copper sheets. It had been found that the productivity of the modified still was 8.67%, 29.08%, and 42.35%, respectively, on top of that of the traditional solar still. This could be due to the activity of the foils and metals, which reflect more radiation and store energy, increasing the temperature of the salt water in the basin. In the second experiment, three modified solar stills in line with aluminum foil and phosphate granules (30 g/L), zinc metal sheet and phosphate granules, and copper metal sheet and phosphate granules were collectively used. It had been found that the productivity of the modified solar still with aluminum foil and phosphate granules (the improvement rate is 30.61%) was on the far side of that with zinc metal sheets and phosphate granules (the improvement rate is 49.961%) and copper metal sheets and phosphate granules (the improvement rate is 62.24%).
AtıfScopus37OpenAlex34İncele - MakaleAçık Erişim2023Scopus SJRQ1Analysis of unsteady thermo-solutal MoS2-EO Brinkman electro-conductive reactive nanofluid transport in a hybrid rotating Hall MHD generator
Shamshuddin, M.D.; Bég, O. Anwar; Akkurt, Nevzat; Leonard, Henry J.; Bég, Tasveer A.
MHD rotating generators offer a plausible renewable energy mechanism. New designs are emerging in which nanotechnology is contributing. Such systems are increasingly deploying more complex functional fluid materials such as base fluids containing magnetic nanoparticles which constitute electromagnetic nanofluids and can be tuned to enhance efficiencies. Motivated by these developments, a mathematical model is presented for the combined effects of Hall current, heat source, chemical reaction and radiative flux on the unsteady rotating thermo-solutal magnetohydrodynamic transport of a Molybdenum disulphide (MoS 2)-EO oil electroconductive Brinkman nanofluid to study the boundary layer characteristics in the vicinity of the side wall of an MHD generator system. The governing dimensional conservation equations are scaled using appropriate transformations into a system of dimensionless coupled partial differential equations. Under appropriate initial and boundary conditions, solutions are derived using the Laplace Transform Method (LTM) and complex variables. The physical impacts of the magnetic, nanoscale, thermal and species control parameters on primary and secondary velocity, temperature and concentration are visualized graphically. The judicious doping of the base fluid with MoS 2 nanoparticles is shown to achieve superior thermal performance for MHD rotating energy generators.
AtıfScopus38OpenAlex24İncele