Yazarlar
Yayınlar
- MakaleAçık Erişim2025Scopus SJRQ2Synthesis, microstructural refinement, and shielding optimization of Gd2O3-reinforced AISI 316L stainless steel: a multi-dimensional integration assessment for targeted protection applications
Yayla, Nihal; Albayrak, M Gökhan; Güler, Ömer; Sen Baykal, Duygu; Alkarrani, Hessa; ALMisned, Ghada; Issa, Bashar; Tekin, H.O.
This study investigates the multi-dimensional effects of increasing Gd2O3 reinforcement on the structural, mechanical, and gamma-ray shielding properties of AISI 316L stainless steel composites. Samples with varying Gd2O3 content (1%, 5%, 10%, and 20% by weight) were synthesized and characterized through x-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) to assess the microstructural changes and homogeneity of Gd2O3 dispersion after mechanical milling. The addition of Gd2O3 significantly enhanced the gamma-ray shielding properties, with the mass attenuation coefficient (MAC), linear attenuation coefficient (LAC), and half-value layer (HVL) improving as the Gd2O3 content increased, particularly in low to moderate photon energy ranges. Simultaneously, the elastic modulus exhibited an inverse relationship, decreasing with higher Gd2O3 content due to the lower stiffness of gadolinium compared to iron. Transmission factor (TF) values also decreased, indicating enhanced photon attenuation with higher Gd2O3 content across various thicknesses. The experimental characterization confirmed improved Gd2O3 dispersion and material uniformity after mechanical milling, contributing to the composites’ superior radiation shielding performance. It can be concluded that Gd2O3-reinforced AISI 316L stainless steel composites offer a promising balance between enhanced radiation shielding properties and reduced mechanical stiffness, making them ideal candidates for applications requiring efficient and adaptable radiation protection especially for portable and non-structural shielding applications.
AtıfScopus3OpenAlex3
İncele - MakaleAçık Erişim2024Scopus SJRQ2Innovative Al6061-gadolinium oxide ods alloys: fabrication and comprehensive characterization of microstructural, physical, mechanical, and radiation shielding properties
ALMisned, Ghada; Yayla, Nihal; Albayrak, M. Gökhan; Güler, Ömer; Baykal, Duygu Sen; Tekin, H.O.
This study explores the development and comprehensive characterization of Al6061-Gd₂O₃ composites, designed to enhance radiation shielding and mechanical properties for critical applications in environments exposed to ionizing radiation. The purpose of this research is to assess the effectiveness of Gd2O3 as a reinforcing material for Al6061, with the aim of creating a dual-function composite that combines structural integrity with superior gamma-ray and neutron attenuation capabilities. Using X-ray diffraction (XRD) and scanning electron microscopy (SEM), we analyzed the microstructural effects of varying Gd2O3 content, observing homogeneous dispersion at low concentrations and clustering at higher levels. Mechanical properties demonstrated that increased Gd2O3 content reduces the elastic modulus, indicating a trade-off between stiffness and shielding efficiency. Radiation shielding parameters, including Transmission Factor (TF), mass attenuation coefficient (MAC), and Fast Neutron Removal Cross Section (FNRCS), were evaluated through Phy-X/PSD and PHITS Monte Carlo simulations. Results indicate that Gd2O3 reinforcement significantly improves gamma-ray and neutron shielding, particularly at higher concentrations, making the composite viable for non-structural applications prioritizing radiation protection. The findings from this study highlight the potential of Gd2O3-reinforced Al6061 composites to serve as effective shielding materials in environments where radiation exposure is a primary concern.
AtıfScopus4OpenAlex5İncele - MakaleAçık Erişim2022Scopus SJRQ1Novel of (PLA/PCL blend)/Gd2O3 rare earth oxide nanocomposites: Shape memory effect, thermal, magnetic, and mechanical properties
Özen Öner, Ecem; Pekdemir, Mustafa Ersin; Ercan, Ercan; Say, Yakup; Kök, Mediha; Aydoğdu, Yıldırım
Poly ɛ-caprolactone (PCL) and poly lactic acid (PLA) stand out as biocompatible polymers. In this study, PCL and PLA were blended in 40:60 ratio, respectively, and then the Gd2O3 compound, which is an important earth element oxide, was mixed in PLA–PCL shape memory polymer (SMP) blend at different rates and polymer blend nanocomposites were obtained. First of all, the effects of Gd2O3 oxide on the thermal properties of the SMP blend were determined with a differential scanning calorimeter (DSC) and thermogravimetric analyzer (TGA), and it was determined that Gd2O3 did not have a significant effect on the melting temperature of the blend, while it significantly increased its thermal stability. As a result of the XRD (X-ray diffraction) analysis of the composites at room temperature, it was determined that the semicrystalline blend, with the addition of Gd2O3, increased its crystalline property. When the shape memory effect was examined, it was understood that the additive did not eliminate the shape memory effect. When the magnetic property of the gadolinium oxide-doped composite, which is magnetocaloric oxide, was examined, the magnetic property of the composite changed from diamagnetic to paramagnetic with increasing additives. Finally, the mechanical properties of the shape memory blend composite were investigated and no regular changes were observed in the mechanical properties with increasing Gd2O3.
AtıfScopus38OpenAlex42İncele