Sürdürülebilir Kalkınma Amaçları
Yayınlar
- MakaleAçık Erişim2026Afet Hazırlığında Stratejik Adım: Tunceli Merkez İlçesi Toplanma Alanlarının AHP ile Analizi
Ogedey, Aysenur
Tunceli, zorlu arazi yapısı ve sert iklim koşulları nedeniyle yaşamın güç olduğu bir bölgedir. Kar yağışlarının yoğun olduğu kış ayları ve düşük sıcaklıklar, engebeli topoğrafya ile birleşerek çeşitli afet risklerini artırmaktadır. Bu koşullar, bölgede afet ve acil durum yönetiminin özel planlama ve hazırlık gerektirdiğini göstermektedir. Bu çalışmada, Tunceli’deki toplanma alanlarının değerlendirilmesi amacıyla Çok Kriterli Karar Verme yöntemlerinden Analitik Hiyerarşi Süreci kullanılmıştır. Analitik Hiyerarşi Süreci, ana ve alt kriterler arasındaki önceliklerin belirlenmesine olanak sağlayarak afet yönetimi süreçlerinde karar vermeyi sistematik hâle getirmektedir. Analiz sonuçları, ana kriterler arasında en yüksek ağırlığa sahip faktörün “toplanma alanı güvenliği” olduğunu (0,707) ortaya koymuştur. Alt kriterler kapsamında ise “toplanma alanı özelliği” içinde “erişim ve tahliye kolaylığı” (0,559) ve “erişim” ana kriteri altında “tabela, kroki ve işaretleme ile yer belirleme” (0,550) öne çıkmaktadır. Bulgular, Analitik Hiyerarşi Süreci’nin Tunceli’de afet toplanma alanlarının güvenlik ve erişilebilirlik odaklı planlamasında etkili bir araç olduğunu göstermektedir. Çalışma, ayrıca afet yönetimi uygulamalarında bilimsel ve sistematik karar verme yöntemlerinin önemini vurgulamaktadır.
- MakaleYalnız künye2026Scopus SJRQ2Comparative Analysis of Sequential Electrooxidation and Electrocoagulation Processes for Leachate Treatment
Ogedey, Aysenur; Oguz, Ensar
This study aims to improve the removal efficiency of chemical oxygen demand (COD), NH₃-N, and turbidity from Bingöl leachate through a sequential electrochemical process. This process includes electrooxidation (EO) with Ti/PdO-CoO anodes and stainless-steel cathodes, followed by electrocoagulation (EC) with aluminum anodes and stainless-steel cathodes. The sequential electrochemical process lasted 400 min, consisting of 360 min of EO followed by 40 min of EC process. At pH 5, COD and turbidity reached optimal removal efficiencies of 89% and 99.9%, respectively, while NH₃-N achieved 88.5% at pH 9.5. These results indicate that the sequential electrochemical process was most effective under these pH values for removing organic matter, nitrogen, and suspended solids. The sequential electrochemical process led to significant improvements in the removal efficiencies of COD, NH₃-N, and turbidity, with increases of 32.5%, 44%, and 6.9%, respectively, compared to the EO process. The sequential electrochemical process showed improvements of 9.5% in COD and NH₃-N removal, and 1.2% in turbidity removal, compared to the results of the EC process. The pseudo-first-order (PFO) reaction rates for the EO and EC processes were determined, resulting in high R2 values (0.98–0.99). Additionally, the total consumption cost of the EO process was higher than that of the EC process. After the sequential electrochemical process, the consumption cost increased from $13.586/kg COD to $24.332/kg COD as the current density increased from 15 mA/cm2 to 25 mA/cm2.
AtıfScopus1WoS1OpenAlex1
İncele - MakaleAçık Erişim2024Scopus SJRQ2Leachate treatment via electrocoagulation–coal-based powdered activated carbon process: Efficiencies, mechanisms, kinetics, and costs
Ogedey, Aysenur; Oguz, Ensar
This study aims to improve COD, NH3-N, and turbidity removal from Bingöl's leachate using a single-reactor integrated electrocoagulation (EC)–coal-based powdered activated carbon (CBPAC) process under various experimental conditions. In the EC-CBPAC process, three stainless-steel cathodes and three aluminum electrodes were connected to the negative and positive terminals of the power supply, respectively. The initial concentrations in the leachate were 1044 mg O2/L for COD, 204 mg/L for NH3-N, and 57 NTU (or 71.25-mg (NH2)2H2SO4/L) for turbidity, respectively. After a 40-min EC-CBPAC process, with a CBPAC dosage of 5 g/L and pH of 5 for COD and turbidity, and 9.5 for NH3-N, the optimum removal efficiencies for COD, NH3-N, and turbidity were achieved at 92%, 40%, and 91%, respectively. When the EC process was applied without CBPAC under the same experimental conditions, the removal efficiencies of COD, NH3-N, and turbidity were 87%, 28%, and 54%, respectively. Before and after the EC-CBPAC process, the Brunauer–Emmett–Teller (BET) surface area, pore volume, and mean pore diameter of the CBPAC were found to be (888 m2/g, 0.498 cm3/g, and 22.28 Å) and (173 m2/g, 0.18 cm3/g, and 42.8 Å), respectively. The optimum pseudo-first-order (PFO) rate constants for COD, turbidity, and NH3-N were determined to be 3.15 × 10−2, 4.77 × 10−2, and 8.8 × 10−3 min−1, respectively. With the current density increasing from 15 to 25 mA/cm2, energy consumption, unit energy consumption, and total cost increased from 68.7 to 122.4 kWh/m3, 6.948 to 15.226 kWh/kg COD, and 0.85 to 1.838 $/kg COD, respectively. Practitioner points: EC-CBPAC process has greater COD, NH3-N, and turbidity removal efficiency than EC process. COD and turbidity achieved their optimum disposal efficiencies at 92% and 91%, respectively, at pH 5 The most efficient disposal efficiency for NH3-N was observed to be 40% at pH 9.5. EC-CBPAC process increased removal efficiencies for COD, NH3-N, and turbidity by 20%, 19%, and 38%, respectively, compared with EC alone. The turbidity, NH3-N, and COD disposal fitted PSO model due to high correlation values (R2 0.94–0.99).
AtıfScopus3WoS3OpenAlex3
İncele - MakaleAçık Erişim2024Scopus SJRQ1Application of electrocoagulation process for the disposal of COD, NH3-N and turbidity from the intermediate sanitary landfill leachate
Ogedey, Aysenur; Oguz, Ensar
This study aims to determine the COD, NH3-N and turbidity disposal efficiencies from leachate in the Bingöl landfill and highlight the electrocoagulation (EC) process’s performance in removing these pollutants. After establishing that landfill leachate was intermediate aged, its characteristics were identified using physical, chemical and elemental analyses. Six parallel-connected electrode plates with stainless steel as the cathode and aluminium as the anode were used to construct an electrocoagulation cell. After a 40-min treatment interval, the optimal disposal efficiencies for COD and turbidity from the leachate were determined to be 87% and 62%, respectively, at pH 5. Following a 40-min reaction, BOD5 concentration and BOD5/COD ratio were determined to be 85.75 mg O2/L and 0.64, respectively, at pH 5. At a NaCl concentration of 10 mM, the optimum disposal efficiency for NH3-N was determined to be 33%. The reaction kinetics matched pseudo-first-order (PFO) kinetics due to high correlation coefficients (R2 = 0.93–0.99) in removing COD, NH3-N and turbidity under different experimental conditions. The optimal reaction rate constants were determined as 2.93 × 10−2 min−1, 1.92 × 10−2 min−1 and 7.3 × 10−3 min−1 for the disposal of COD, NH3-N and turbidity, respectively. Energy consumption, unit energy consumption and total consumption cost rose in the EC process when the current density was augmented from 15 to 25 mA/cm2.
AtıfScopus14WoS11OpenAlex12İncele - MakaleYalnız künye2024Scopus SJRQ1Exploring Disposal Efficiency of COD, NH3-N, and Turbidity in Diluted Real Leachate Using Ti/PdO-CoO Electrodes in an Electrooxidation Cell: An Investigation into Oxidation Mechanism and Reaction Kinetics Studies
Ogedey, Aysenur; Oguz, Ensar
Highlights Optimum disposal efficiency for turbidity was 96.5 at 10 mM NaCI. Optimum disposal efficiency for COD was 60.5% at 10 mM NaCI. Optimum disposal efficiency for NH3-N was 64.9% at 10 mM NaCI. Turbidity, NH3-N, and COD disposal fitted PFO model due to high R2 values. The Ti/PdO-CoO electrode has a stability of 96 h.
AtıfScopus2WoS2OpenAlex2İncele - MakaleYalnız künye2018Scopus SJRQ1Antioxidant biomarkers in Gammarus pulex to evaluate the efficiency of electrocoagulation process in landfill leachate treatment
Serdar, Osman; Yildirim, Nuran Cikcikoglu; Tatar, Sule; Yildirim, Numan; Ogedey, Aysenur
The discharge of landfill leachate into the environment without effective treatment poses a serious threat for the aquatic ecosystems. This present study was undertaken to evaluate whether electrocoagulation process is efficient for treatment landfill leachate (LL) or not by using antioxidant biomarkers in Gammarus pulex. Glutathione peroxidase (GSH-Px), superoxide dismutase (SOD), and catalase (CAT) activities and malondialdehyde (MDA) and glutathione (GSH) levels in G. pulex exposed to untreated, treated, and diluted rates 1/10 and 1/20 in both LL during 24 and 96 h were tested. Physiochemical characteristics of leachate (chemical oxygen demand, electrical conductivity, pH, phosphate, turbidity, NH3, Cl−, and color) were determined pre and post treatment. All physiochemical characteristics of LL decreased after treatment process. GSH-Px and CAT activities and GSH and MDA levels were increased in untreated groups when compared to control (p < 0.05). After treatment by electrocoagulation, MDA and GSH levels and CAT activities were returned to control values. In conclusion, the abilities of LL to stimulate oxidative stress in G. pulex have been proven. The results revealed that antioxidant parameters are useful biomarkers for determining the treatment efficiency of the electrocoagulation process.
AtıfScopus19WoS17OpenAlex23İncele - MakaleYalnız künye2018Scopus SJRQ2COD removal from leachate by electrocoagulation process: Treatment with monopolar electrodes in parallel connection
Tanyol, Mehtap; Ogedey, Aysenur; Oguz, Ensar
This study examines the removal of chemical oxygen demand (COD) from landfill leachate generated from the municipal landfill site of Bingol, Turkey. The effect of parameters such as current density, pH, and inter-electrode distance during the electrocoagulation (EC) process on COD removal of the process was investigated. Moreover, for COD removal, the energy consumption and operating costs were calculated for iron electrode under the EC conditions. COD removal efficiency was 72.13% at the current density of 16 mA m-2, pH of 8.05, and the inter-electrode distance of 9 mm at the detention time of 60 min with iron electrode and the COD concentration was reduced from 6,100 mg L-1 to 1,700 mg L-1 by EC. The highest value of the electrical energy and electrode consumptions per kg of COD in the optimum conditions were determined as 0.055 kWh kg-1 COD and 3.43 kg kg-1 COD and the highest operating cost value was found to be 1.41 US$ kg-1 COD for 0-60 min time intervals.
AtıfScopus29WoS29OpenAlex32İncele - MakaleYalnız künye2018Scopus SJRQ2The using of Gammarus pulex as a biomonitor in ecological risk assessment of secondary effluent from municipal wastewater treatment plant in Tunceli, Turkey
Tatar, Sule; Cikcikoglu Yildirim, Nuran; Serdar, Osman; Yildirim, Numan; Ogedey, Aysenur
The objectives of this research are the assessment of secondary effluents (SEs) quality by evaluating chemical parameters and biomarkers. For this purpose, MDA and GSH levels were determined by spectrofotometer. SOD, CAT, and GPX activities were determined by using ELISA kit in the groups of control and the groups exposed to SE. The level of MDA and the activities of SOD in Gammarus pulex vary depending on the exposure time. GSH levels and GSH-PX activities increased in G. pulex exposed to the effluent compared to the control during 24 h and 96 h. CAT activities were in SE group were found lower than the control in G. pulex during 24 h and 96 h. Current experimental results show that SOD, CAT, GPX activities, and GSH and MDA levels in G. pulex are sensitive and appropriate responses for assess the effects of anthropogenic contaminants on the aquatic ecosystems, particularly effluent complex mixtures.
AtıfScopus19WoS19OpenAlex22İncele - MakaleYalnız künye2017Scopus SJRQ2Optimizing electrocoagulation process using experimental design for COD removal from unsanitary landfill leachate
Ogedey, Aysenur; Tanyol, Mehtap
Leachate is the most difficult wastewater to be treated due to its complex content and high pollution release. For this reason, since it is not possible to be treated with a single process, a pre-treatment is needed. In the present study, a batch electrocoagulation reactor containing aluminum and iron electrodes was used to reduce chemical oxygen demand (COD) from landfill leachate (Tunceli, Turkey). Optimization of COD elimination was carried out with response surface methodology to describe the interaction effect of four main process independent parameters (current density, inter-electrode distance, pH and time of electrolysis). The optimum current density, inter-electrode distance, pH and time of electrolysis for maximum COD removal (43%) were found to be 19.42 mA/m2, 0.96 cm, 7.23 and 67.64 min, respectively. The results shown that the electrocoagulation process can be used as a pre-treatment step for leachate.
AtıfScopus15WoS16İncele - MakaleYalnız künye2017Scopus SJRQ1Investigation of optimum conditions for efficient COD reduction in synthetic sulfamethazine solutions by Pleurotus eryngii var. ferulae using response surface methodology
Yonten, Vahap; Alp, Hevidar; Yildirim, Numan; Yildirim, Nuran Cikcikoglu; Ogedey, Aysenur
This study aims to explore the optimum conditions for P. eryngii var. ferulae in adsorption of sulfamethazine (SM) from synthetic solutions via reduction of chemical oxygen demand (COD). The optimum conditions were optimized using the response surface methodology (RSM) developed by the application of the quadratic model associated with the central composite design. For this aim, RSM was employed to determine the effects of some parameters on this adsorption process by fungal biomass as an effective and available adsorbent. The investigated parameters were initial concentration of sulfamethazine (70–235 mg L−1), solution pH (3–7), adsorbent dosage (0.3–1.5 g), and contact time (5–25 min). The significant factors on each experimental design response were identified from the analysis of variance. The results of RSM analyzes revealed that optimum conditions of initial SM concentration, pH, adsorbent dosage, and contact time for maximum COD removal (82%) were achieved as 400 mg L−1, 11, 1.46 g, and 15.4 min, respectively. The results showed that dead biomass of P. eryngii var. ferulae were an appropriate adsorbent for the removal of COD in the SM medium from synthetic solutions.
AtıfScopus13WoS12OpenAlex15İncele
