Yazarlar
Yayınlar
- MakaleYalnız künye2026Scopus SJRQ2Manufacturing, Structural Characterization, and Radiation Interaction Evaluation of Lightweight 6061-Al/Ytterbium(III) Oxide Composites with Emphasis on Gamma-Ray Shielding and Fast Neutron Removal Potential
Guler, Seval Hale; Yayla, Nihal; Guler, Omer; ALMisned, Ghada; Sen Baykal, Duygu; Kilic, Gokhan; Tekin, Huseyin Ozan
In this study, 6061-aluminum metal matrix composites doped with varying concentrations of ytterbium(III) oxide were synthesized using high-energy mechanical alloying to evaluate their structural, physical, and radiation shielding properties. X-ray diffraction confirmed the retention of the aluminum crystal structure with no secondary phase formation, while scanning electron microscopy and energy-dispersive X-ray spectroscopy revealed homogenous dispersion of Yb2O3 particles within the matrix. With increasing Yb2O3 content, particle densification and structural integrity were significantly enhanced. Gamma-ray and neutron shielding performance was assessed through theoretical modeling and Monte Carlo simulations. At low photon energy, the 20 wt% Yb2O3 composites showed a remarkable increase in linear attenuation coefficients compared to the undoped 6061-aluminum matrix. Neutron removal efficiency also increased by 32% at the highest Yb2O3 content. It can be concluded that Yb2O3 incorporation significantly improves both the photon and neutron shielding performance of the 6061-aluminum metal matrix.
- MakaleAçık Erişim2023Scopus SJRQ3Structural, physical, and radiation absorption properties of a significant nuclear power plant component: A comparison between REX-734 and 316L SS austenitic stainless steels
Say, Yakup; Güler, Ömer; Kavaz, Esra; ALMisned, Ghada; Ene, Antoaneta; Tekin, Huseyin Ozan
Austenitic stainless steels (SSs) are commonly used as in-core and surrounding structural materials in today’s industrial BWR and PWR systems. Such adaptable steels have also been the primary materials studied and used in several advanced nuclear reactor technologies, such as fast breeding and magnetic fusion reactors. In this study, some critical material properties, such as structural, physical, and radiation-shielding properties of REX-734 and 316L SS, were experimentally evaluated and compared to those of a number of other alloys. In addition to homogeneous element distribution, both alloys exhibit strong crystal orientation. The REX-734 alloy has a tensile strength of 1,259 MPa, whereas the 316L SS alloy has a tensile strength of 495 MPa. Moreover, nitrogen in the REX-734 alloy formed ultra-hard nitrides with Cr, Nb, and Si and precipitated into the structure and increased the strength. According to our findings, the mass attenuation coefficient values of the 316L SS sample were slightly higher than those of the REX-734 sample at all energies. It can be concluded that the REX-734 sample, with its exceptional strength qualities and excellent radiation attenuation capabilities, may be a viable nuclear power plant material for future investigations.
AtıfScopus7
İncele - MakaleYalnız künye2022Scopus SJRQ2Boron nitride nanosheet-reinforced WNiCoFeCr high-entropy alloys: the role of B4C on the structural, physical, mechanical, and radiological shielding properties
Kavaz, Esra; Gul, Ali Oktay; Basgoz, Oykum; Guler, Omer; ALMisned, Ghada; Bahceci, Ersin; Guler, Seval Hale; Tekin, H.O.
The synthesis and extensive characterization of newly developed boron nitride nanosheet (BNNSs)-reinforced WNiCoFeCr high-entropy alloys (HEAs) are presented. The influence of B4C on the structural, physical, mechanical, and nuclear shielding characteristics of synthesized HEAs has been widely examined in terms of its monotonic effects on the behavior changes. The internal morphology and structural characteristics of the fabricated composites are first investigated using X-ray diffraction, scanning electron microscopy, and energy-dispersive spectroscopy. Wear testing is used to determine the coefficient of friction as a function of sliding distance. Experimental gamma ray and neutron setups are created to determine their shielding characteristics against nuclear radiation. Finally, the shielding characteristics of nuclear radiation for gamma ray and fast neutrons are compared extensively to those of many existing and new-generation shielding materials. Among the examined samples, the S2 sample with B4C and BNNSs reinforcement had the greatest mechanical characteristics. Our findings imply that increasing B4C directly contributes to the shielding qualities of nuclear radiation. The B4C created in the structure of BNNSs contributes to the overall properties of HEAs, which are crucial for nuclear applications, since HEAs are being examined as a component of future nuclear reactors. Additionally, B4C is a very versatile material that may be used in circumstances where mechanical and nuclear shielding properties need to be enhanced for a variety of radiation energies.
AtıfScopus11OpenAlex12İncele